SHERMAN powder coated wire fi 0.8 0.45 KG

SHERMAN SINGLE SHIELD DRUTT fi 0.8 0.45 KG: Sherman self-stripping powder wire fi 0.8 mm/ 0.45 kg (D100) K-NGS E71T-GS. It is designed for welding ordinary and higher strength carbon steels not exceeding 510 MPa. Self-cored wire for welding steel parts of small thickness without shielding gas. It is used in construction, tank manufacturing, agricultural equipment, used in both production and repair of equipment. Fast solidifying, easy to weld sheet metal with poor edge preparation. Chemical composition: C - 0,16 Si - 0.31 Mn -0.82 P - 0,014 S - 0,006 Al - 1.30 Welding parameters: Wire diameter - 0.8 mm Welding current - 40-100 A Welding voltage - 12-16 V Application: Designed for all welding positions, single-layer fillet and butt welds, during automatic and semi-automatic welding. Can be used for aluminized and galvanized steels with a thickness of 1.2 - 5.0 mm. Developed for general use when there are no impact resistance requirements. Recommended DC polarity: "-" on the wire. SHERMAN PROSPECTED SWORD fi 0.8 0.45 KG: Sherman self-stripping powder wire fi 0.8 mm/ 0.45 kg (D100) K-NGS E71T-GS. It is designed for welding ordinary and higher strength carbon steels not exceeding 510 MPa. Self-cored wire for welding steel parts of small thickness without shielding gas. It is used in construction, tank manufacturing, agricultural equipment, used in both production and repair of equipment. Fast solidifying, easy to weld sheet metal with poor edge preparation. Chemical composition: C - 0,16 Si - 0.31 Mn -0.82 P - 0,014 S - 0,006 Al - 1.30 Welding parameters: Wire diameter - 0.8 mm Welding current - 40-100 A Welding voltage - 12-16 V Application: Designed for all welding positions, single-layer fillet and butt welds, during automatic and semi-automatic welding. Can be used for aluminized and galvanized steels with a thickness of 1.2 - 5.0 mm. Developed for general use when there are no impact resistance requirements. Recommended DC polarity: "-" on the wire.