Heater induk. INDUCTOR 3 230V 3,5kW DHI44E

INDUCTOR 3C/E is a revolutionary induction heater for rapid flameless heating of ferrous metals and aluminum by induction.Using the rules of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just a few seconds to a depth of 4mm. By heating only the selected spot, it does not damage glass, rubber parts, plastic parts and painted surfaces in the immediate vicinity of the heater's operation. The heaters can also be used to heat up the area.Despite its small size and weight (13.5kg), it achieves high output parameters. The built-in liquid cooling system allows it to achieve a power output of 3.7kW. Recommended for use in the field. Recommended for any passenger and commercial vehicle service for body and mechanical repairs. For repair and wheel alignment applications, tire changers and mechanic shops. Facilitates removal of locked bolts, nuts, pins, bearings and other automotive parts.Guarantees reduced repair time and maximum control of heating during operation. Unlike a gas burner - the induction heater, heating the metal only in the selected area to a temperature of 500-600˚C, does not change the technical characteristics of the steel. The induction heater is not a gas burner. Power infinitely adjustable from 10 - 100%. Timer allows automatic termination of heating after a specified time.INDUCTOR 3C/E is a revolutionary induction heater for rapid flameless heating of ferrous metals and aluminum by induction.Using the rules of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just a few seconds to a depth of 4mm. By heating only the selected spot, it does not damage glass, rubber parts, plastic parts and painted surfaces in the immediate vicinity of the heater's operation. The heaters can also be used to heat up the area.Despite its small size and weight (13.5kg), it achieves high output parameters. The built-in liquid cooling system allows it to achieve a power output of 3.7kW. Recommended for use in the field. Recommended for any passenger and commercial vehicle service for body and mechanical repairs. For repair and wheel alignment applications, tire changers and mechanic shops. Facilitates removal of locked bolts, nuts, pins, bearings and other automotive parts.Guarantees reduced repair time and maximum control of heating during operation. Unlike a gas burner - the induction heater, heating the metal only in the selected area to a temperature of 500-600˚C, does not change the technical characteristics of the steel. The induction heater is not a gas burner. Power infinitely adjustable from 10 - 100%. Timer allows automatic termination of heating after a specified time. Current drawn from the grid 16 A Rated supply voltage 230 V (180 V-265 V) 50/60 Hz Power 4 kVA Length of complete cable 2 m Tank capacity 2,5 l Cooling type liquid Degree of protection IP22 Weight 13.5 kg Overall dimensions L x W x H 240x200x440 mm Frequency 18 - 60 kHz Continuous power 3.7 kW Adjustment steps 10 - 100 %