The PL-002Ppa type soldering burner is a propane-air burner with an injector (nipple) mixing system.. It is adapted to be supplied with propane-butane gas (mixture B according to PN-82/C-69000) directly from a cylinder with a gas content of 2 kg and atmospheric air.Application. Palnik PL-002Ppa is designed for soldering small components of steel and non-ferrous metals. It can also be used for heating, tanning, etc. related processes. P> The heat output of the PL-002Ppa can be used for heating, tanning, etc. The heat output of the burner depends on the size of the cap, the type of gas, the gas content in the cylinder and the ambient temperature. Using the largest cap No. 3, it is possible to solder with LS45K silver binder; LS45 with a strip thickness of1 mm or a wire diameter of 1 mm, or LMF copper binder with a rod diameter of up to 6 mm. The area of brazed sheets should not exceed 100 cm2 and a thickness of 1 mm and bars - a diameter of 10 mm.. The flat cap is used for tanning or heating..