INDUCTOR 3 BUTTERFLY BFH01 is a revolutionary induction heater for rapid flameless heating of ferrous metals and aluminum by induction method. The BUTTERFLY BFH01 is a revolutionary induction heater for rapid flameless heating of ferrous metals and aluminum by induction method. Using the rules of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just seconds to a depth of 4mm. By heating only the selected spot, it does not damage glass, rubber parts, plastic parts and painted surfaces in the immediate vicinity of the heater's operation. The heaters can also be used to heat up the area.Despite its small size and weight(7kg), it achieves high output parameters. The built-in liquid-cooling system allows 3.5kW continuous power for more than 30 minutes, and the patented tip system allows quick replacement. Preferred for use with the heater. Recommended for any auto or light truck service for body and mechanical repairs. For repair and wheel alignment applications, tire changers and mechanic shops. Facilitates removal of locked bolts, nuts, pins, bearings and other automotive parts.Guarantees reduced repair time and maximum control of heating during operation. Unlike a gas burner - induction heater by heating the metal only in the selected area to a temperature of 500-600˚C does not change the technical characteristics of the steel. Induction heater is not a good solution for the repair of steel. Power adjustable in steps of 10%. INDUCTOR 3 BUTTERFLY BFH01 is a revolutionary induction heater for rapid flameless heating of ferrous metals and aluminum by induction method. The BUTTERFLY BFH01 is a revolutionary induction heater for rapid flameless heating of ferrous metals and aluminum by induction method. Using the rules of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just seconds to a depth of 4mm. By heating only the selected spot, it does not damage glass, rubber parts, plastic parts and painted surfaces in the immediate vicinity of the heater's operation. The heaters can also be used to heat up the area.Despite its small size and weight(7kg), it achieves high output parameters. The built-in liquid cooling system allows 3.5kW continuous power for more than 30 minutes, and the patented tip system allows quick replacement. Recommended for use with the heater. Recommended for any auto or light truck service for body and mechanical repairs. For repair and wheel alignment applications, tire changers and mechanic shops. Facilitates removal of locked bolts, nuts, pins, bearings and other automotive parts.Guarantees reduced repair time and maximum control of heating during operation. Unlike a gas burner - induction heater by heating the metal only in the selected area to a temperature of 500-600˚C does not change the technical characteristics of the steel. Induction heater is not a good solution for the repair of steel. Power adjustable in steps of 10%. Current drawn from the mains 16A Mains protection 20A Rated supply voltage 230V; 50Hz/60Hz (1ph) Length of complete cable 1,8 m Tank capacity 2.5 liters Type of cooling liquid Weight 7kg Overall dimensions L x W x H 21x45x26 cm Continuous operation time more than 20 minutes at maximum power Frequency 20-60 kHz automatically adjustable Continuous power 3.5 kW Maximum power 3.5 kW Adjustment steps 10