INDUCTOR 5 IHD300 is a revolutionary induction heater for rapid flameless heating of ferrous metals and aluminum by induction.Using the rules of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just seconds to a depth of 4mm. By heating only the selected spot, it does not damage the glass, rubber parts, plastic parts and painted surfaces in the immediate vicinity of the heater's operation. Patented system. The patented tip system allows quick replacement of tips.. Recommended for any passenger and commercial vehicle service for body and mechanical repairs. For repair and wheel alignment applications, tire changers and mechanic shops. Facilitates removal of locked bolts, nuts, pins, bearings and other automotive parts.Guarantees reduced repair time and maximum control of heating during operation. Unlike a gas burner - the induction heater, heating the metal only in a selected area to a temperature of 500-600˚C, does not change the technical characteristics of the steel. The induction heater is not a gas burner. Power adjustable in steps of 10%. Power supply parameters. Single-phase 230V power supply. Power supply. INDUCTOR 5 IHD300 is a revolutionary induction heater for rapid flameless heating of ferrous metals and aluminum by induction.Using the rules of electromagnetic induction, it can deliver a tremendous amount of heat to a specific spot in just a few seconds to a depth of 4mm. By heating only the selected spot, it does not damage the glass, rubber parts, plastic parts and painted surfaces in the immediate vicinity of the heater's operation. Patented system. The patented tip system allows quick replacement of tips.. Recommended for any passenger and commercial vehicle service for body and mechanical repairs. For repair and wheel alignment applications, tire changers and mechanic shops. Facilitates removal of locked bolts, nuts, pins, bearings and other automotive parts.Guarantees reduced repair time and maximum control of heating during operation. Unlike a gas burner - the induction heater, heating the metal only in a selected area to a temperature of 500-600˚C, does not change the technical characteristics of the steel. The induction heater is not a gas burner. Power adjustable in steps of 10%. Power supply parameters. Single-phase 230V power supply. Power supply. Current drawn from the mains 16A Mains protection 20A delayed Rated supply voltage 230V; 50Hz/60Hz (1ph) Length of complete cable 3 m Tank capacity 10 liters Cooling type liquid Degree of protection IP 21 Weight 39kg with refrigerant Overall dimensions L x W x H 43x43x62 cm Continuous operation time more than 30 minutes at maximum power Frequency 15-50 kHz automatically adjustable Continuous power 3.9 kW Maximum power 4,5 kW Heating power (temperature about 1000˚C) 7x12x4mm in 1 second Adjustment steps 10