Magnum MIG 315 MMA Synergy

The MAGNUM MIG 315 MMA device is a professional semi-automatic welding machine powered by a three-phase 400V mains with a maximum welding current of 315A. The power source was built with inverter technology using IGBT transistors, which translates into reduced electromagnetic interference, low power loss, increased efficiency and reliability of the power source, and significantly affected the reduction of energy consumption.ACTION MODES AVAILABLE: - MIG - manual settings - MIG - synergic settings - MMA - welding with covered electrodes (rutile, basic, acid), - FCAW - welding with self-shielded wire - (you need to change the polarity on the welder: minus (-) on the welding gun, plus (+) on the ground!), - POINT - timed welding function, used to tack workpieces, so that you can get an even weld seam length.It is designed for all kinds of welding work in locksmith shops, repair shops, industrial workshops, factories, etc. The offered semi-automatic machine is made with inverter technology, equipped with a digital display of welding current and voltage and synergic control - this function automatically selects welding parameters, when adjusting the voltage, the wire feed speed is selected automatically.The MIG 315 MMA machine has adjustable inductance, which optimizes the dynamic characteristics of the arc depending on the thickness of the material to be welded. The value of the inductance affects the shape of the weld, its width, the depth of fusion and the amount of spatter. The semi-automatic machine is dedicated to welding low-carbon steel, low-alloy steel, alloyed steels, as well as aluminum and its alloys. The machine is designed for welding low-carbon steel, low-alloy steel, alloyed steels and aluminum and its alloys. The device has a stepless adjustment of welding parameters, and is equipped with an overload thermal protection system to prevent excessive overheating. The welder is equipped with a professional 4-roller wire feeder with a "euro connector" socket, which allows you to connect different types of welding chucks and an output for a gas heater.MIG/MAG WELDING PARAMETERS: - MIG/MAG welding current: 40 - 315 [A]. - MIG/MAG welding voltage: 16 - 29 [V]. - Idling voltage: 69 [V]MMA WELDING PARAMETERS: - MMA welding current: 20 - 280 [A] - Idling voltage: 69 [V]The MAGNUM MIG 315 MMA device is a professional semi-automatic welding machine powered by a three-phase 400V mains with a maximum welding current of 315A. The power source was built with inverter technology using IGBT transistors, which translates into reduced electromagnetic interference, low power loss, increased efficiency and reliability of the power source, and significantly affected the reduction of energy consumption.ACTION MODES AVAILABLE: - MIG - manual settings - MIG - synergic settings - MMA - welding with covered electrodes (rutile, basic, acid), - FCAW - welding with self-shielded wire - (you need to change the polarity on the welder: minus (-) on the welding gun, plus (+) on the ground!), - POINT - timed welding function, used to tack workpieces, so that you can get an even weld seam length.It is designed for all kinds of welding work in locksmith shops, repair shops, industrial workshops, factories, etc. The offered semi-automatic machine is made with inverter technology, equipped with a digital display of welding current and voltage and synergic control - this function automatically selects welding parameters, when adjusting the voltage, the wire feed speed is selected automatically.The MIG 315 MMA machine has adjustable inductance, which optimizes the dynamic characteristics of the arc depending on the thickness of the material to be welded. The value of the inductance affects the shape of the weld, its width, the depth of fusion and the amount of spatter. The semi-automatic machine is dedicated to welding low-carbon steel, low-alloy steel, alloyed steels, as well as aluminum and its alloys. The machine is designed for welding low-carbon steel, low-alloy steel, alloyed steels and aluminum and its alloys. The device has a stepless adjustment of welding parameters, and is equipped with an overload thermal protection system to prevent excessive overheating. The welder is equipped with a professional 4-roller wire feeder with a "euro connector" socket, which allows you to connect different types of welding grips and an output for a gas heater.MIG/MAG WELDING PARAMETERS: - MIG/MAG welding current: 40 - 315 [A]. - MIG/MAG welding voltage: 16 - 29 [V]. - Idling voltage: 69 [V]MMA WELDING PARAMETERS: - MMA welding current: 20 - 280 [A] - Idling voltage: 69 [V] TECHNICAL DATA: - Power supply: AC 400 [V], 50/60 [Hz], - Required protection: 20 [A] class C - Efficiency: 60 [%]. - Maximum wire spool diameter: 300 [mm]. - Wire diameter: 0.8/1.0/1.2 [mm] - Enclosure protection class: IP21S - Weight: 40 [kg]