Magnum THF 206P

The THF 206P from MAGNUM is a lightweight, portable inverter welder designed for TIG HF (non-contact arc ignition) welding with DC direct current. provides excellent performance in welding unalloyed steel, low-alloy steel, high-alloy steel, titanium and other weldable metals and alloys. The device can also be used for MMA welding using fusible covered electrodes.. The THF 206P welder is powered by a single-phase 230V power supply and has a high 60% duty cycle at 200 A, which allows it to be used in various industrial segments. The device has an intuitive, easy-to-use control panel that allows quick and precise selection of individual welding parameters. The welder is designed for all kinds of welding work in locksmith workshops, repair shops, etc.. The digital function panel allows precise control of all the most important welding parameters for DC TIG methods:. - TIG process flow chart,. - Gas discharge before welding,. - Starting current,. - Current rise time,. - Welding current,. - Current falling time,. - End (quench) current,. - Gas discharge after welding. - TIG PULSE: peak current, base current, pulse frequency,. - Spot welding. - 2T/4T operation mode. The current source is built based on IGBT (Insulated Gate Bipolar Transistor) transistors, which provide minimum electromagnetic interference, low power loss in the base circuits, enabling increased performance and reliability of the current source.Very high efficiency, directly translating into lower power consumption, and high switching frequency, provide instantaneous adjustment of current to changes in parameters during welding The THF 206P from MAGNUM is a lightweight, portable inverter welder designed for TIG HF (non-contact arc ignition) welding with DC direct current. provides excellent performance in welding unalloyed steel, low-alloy steel, high-alloy steel, titanium and other weldable metals and alloys. The device can also be used for MMA welding using fusible covered electrodes.. The THF 206P welder is powered by a single-phase 230V power supply and has a high 60% duty cycle at 200 A, which allows it to be used in various industrial segments. The device has an intuitive, easy-to-use control panel that allows quick and precise selection of individual welding parameters. The welder is designed for all kinds of welding work in locksmith workshops, repair shops, etc.. The digital function panel allows precise control of all the most important welding parameters for DC TIG methods:. - TIG process flow chart,. - Gas discharge before welding,. - Starting current,. - Current rise time,. - Welding current,. - Current falling time,. - End (quench) current,. - Gas discharge after welding. - TIG PULSE: peak current, base current, pulse frequency,. - Spot welding. - 2T/4T operation mode. The current source is built based on IGBT (Insulated Gate Bipolar Transistor) transistors, which provide minimum electromagnetic interference, low power loss in the base circuits, enabling increased performance and reliability of the current source.Very high efficiency, directly translating into lower power consumption, and high switching frequency, provide instantaneous adjustment of current to changes in parameters during welding TECHNICAL DATA Power supply: 230V/50Hz. Welding current: 200A. Efficiency: 60%. MMA welding current: 5-160. TIG welding current: 10-200. PULSE function: YES. HFunction HF: YES. 2T/4T function: YES Case protection: IP21. Cooling: fan. Weight: 6KG.