Spartus EasyCUT 40s plasma cutter

SPARTUS EasyCUT 40s is a plasma cutter whose cutting current control is in the range of20 - 40A. Modern technologies used in the production of the device made it possible to create a source with low weight and dimensions. The device provides the ability to cut metals and any electrically conductive materials. Maximum thickness of cutting elements is 16mm. The device has the following features. The cutter has a simple and clear function panel that allows you to easily control the machine, even when wearing gloves. The 2T/4T mode switch allows you to work with the handle according to your preference. The front panel is also equipped with an SK35 socket and a central plug for mounting a plasma chuck.EasyCUT 40s is equipped with a pressure regulator with a filter block, which is mounted on the back of the housing, in a place specially designed for this purpose (protected air preparation block from damage, for example, during handling).The cutter has a built-in non-contact pilot arc initiation system without high-frequency HF - ensures excellent cutting quality, with extended life of consumable parts.SPARTUS EasyCUT 40s ready-to-use package includes a ground wire and a plasma holder armed with parts - SPARTUS SP45H with a length of 4m.Example application: workshop work, repair work in the field.SPARTUS EasyCUT 40s is a plasma cutter whose cutting current control is in the range of20 - 40A. Modern technologies used in the production of the device made it possible to create a source with low weight and dimensions. The device provides the ability to cut metals and any electrically conductive materials. Maximum thickness of cutting elements is 16mm. The device has the following features. The cutter has a simple and clear function panel that allows you to easily control the machine, even when wearing gloves. The 2T/4T mode switch allows you to work with the handle according to your preference. The front panel is also equipped with an SK35 socket and a central plug for mounting a plasma chuck.EasyCUT 40s is equipped with a pressure regulator with a filter block, which is mounted on the back of the housing, in a place specially designed for this purpose (protected air preparation block from damage, for example, during handling).The cutter has a built-in non-contact pilot arc initiation system without high-frequency HF - ensures excellent cutting quality, with extended life of consumable parts.SPARTUS EasyCUT 40s ready-to-use package includes a ground wire and a plasma holder armed with parts - SPARTUS SP45H with a length of 4m.Example application: workshop work, repair work in the field. Cutting current 40 Supply voltage ~1× 230V ± 10% 50 / 60 Hz Cutting current 20 - 40A Max. cutting thickness 16mm Work cycle 30% Operating output voltage 88 - 96V Recommended operating pressure 4.5 bar Post-gas yes Arc striking without HF Current consumption 31A Power factor (cosφ) 0.73 Efficiency η 77 Insulation class H Degree of protection IP21S Weight 6.5kg Dimensions 440×145×245mm