Modern and innovative MOFSET technology - this is what the TIGER TIG 200 DC HF PULS inverter welder was designed according to. This product is characterized by the possibility of welding on two methods, which are: . MMA welding with direct current (DC) covered electrodes . and TIG DC/TIG DC PULS welding. The ability to choose a welding method equals wider application. The TIGER TIG 200 DC HF PULS inverter welder is designed for welding with rutile and basic electrodes up to 4 mm in diameter, as well as for welding with tungsten electrodes in an inert gas shield. The device is ideal for welding various types of steel (acid-resistant, carbon or stainless steel), as well as for welding non-ferrous metals (titanium or copper), excluding brass and aluminum.. TIGER TIG 200 DC HF PULS inverter welder - a device with multiple functions The TIGER TIG 200 DC HF PULS inverter welder is equipped with a digital, easy-to-read welding current screen. The device allows you to choose the operation from three TIG modes, which are: work without pulse. operation with high-frequency pulse (50-200Hz). work with low-frequency pulse (0.5-2Hz). When using the TIG method, after the arc is extinguished, we have the ability to adjust the gas outflow, while the useful TIG DC PULS function controls the welding and does not allow burning through a thin component that is less than 1.5mm thick. In non-contact mode (TIG HF), arc ignition takes place. The TIGER TIG 200 DC HF PULS inverter welder is additionally equipped with a red LED, which communicates the shutdown of the device during overloading. TIGER TIG 200 DC HF PULS inverter welder, and MMA welding. The product has several features that make MMA welding easier. These include: ARC FORCE (arc dynamics): shortens the arc length when increasing the welding current, optimizing the transfer of molten electrode droplets to the material being welded, preventing the arc from being extinguished when the electrode comes into contact with the material being welded. HOT START: increases welding current during arc ignition to facilitate electrode ignition. ANTI STICK: limits the welding current to prevent the electrode from sticking to the material being welded. The TIGER TIG 200 DC HF PULS inverter welder is an excellent product for both field work and repair operations.Modern and innovative MOFSET technology - this is what the TIGER TIG 200 DC HF PULS inverter welder was designed according to. This product is characterized by the possibility of welding on two methods, which are: . MMA welding with direct current (DC) covered electrodes . and TIG DC/TIG DC PULS welding. The ability to choose a welding method equals wider application. The TIGER TIG 200 DC HF PULS inverter welder is designed for welding with rutile and basic electrodes up to 4 mm in diameter, as well as for welding with tungsten electrodes in an inert gas shield. The device is ideal for welding various types of steel (acid-resistant, carbon or stainless steel), as well as for welding non-ferrous metals (titanium or copper), excluding brass and aluminum.. TIGER TIG 200 DC HF PULS inverter welder - a device with multiple functions The TIGER TIG 200 DC HF PULS inverter welder is equipped with a digital, easy-to-read welding current screen. The device allows you to choose the operation from three TIG modes, which are: work without pulse. operation with high-frequency pulse (50-200Hz). work with low-frequency pulse (0.5-2Hz). When using the TIG method, after the arc is extinguished, we have the ability to adjust the gas outflow, while the useful TIG DC PULS function controls the welding and does not allow burning through a thin component that is less than 1.5mm thick. In non-contact mode (TIG HF), arc ignition takes place. The TIGER TIG 200 DC HF PULS inverter welder is additionally equipped with a red LED, which communicates the shutdown of the device during overloading. TIGER TIG 200 DC HF PULS inverter welder, and MMA welding. The product has several features that make MMA welding easier. These include: ARC FORCE (arc dynamics): shortens the arc length when increasing the welding current, optimizing the transfer of molten electrode droplets to the material being welded, preventing the arc from being extinguished when the electrode comes into contact with the material being welded. HOT START: increases welding current during arc ignition to facilitate electrode ignition. ANTI STICK: limits the welding current to prevent the electrode from sticking to the material being welded. The TIGER TIG 200 DC HF PULS inverter welder is an excellent product for both field work and repair operations. Technical data Code 103 031 Device type TIGER TIG 200 Supply voltage [V] 230 Idle current voltage [V] 65 Welding current adjustment range TIG DC 10-200 MMA 10-200 Max efficiency at 40°C EN 60974-1 200A@60% 156A@100% Protection class [IP] 21S Dimensions[cm] 40x18x31 Weight[kg] 9