YH/WEP948 soldering station, 75W soldering iron + 60W soldering tip The WEP 948 soldering station has the functions of a tin desoldering machine and a soldering tip. With powerful heating elements, it allows you to quickly and conveniently solder / desolder all electronic components. Soldering iron built with ESD standards in mind, so you can be sure that you will not damage electronic components during service. The WEP 948 soldering station corrects the set temperature in real time, thanks to the precise PID controller, this makes the soldering station has a high temperature stability, even with large fluctuations in heat take-up. The station's power supply is based on a transformer with good insulation of heating elements, this makes it possible to achieve high reliability and safe operation. The device has the following functions: - C/F operation. The ability to set on the display in which units the temperature will be displayed. - Sleep function The grotto flask takes a long time to heat up, and each time warming up and cooling down would generate a lot of wasted time. Therefore, a sleep function has been added to the station, thanks to which, after putting the flask on the stand, the flask after a predetermined time(60 seconds to even 99minutes) will go into sleep mode, and the temperature will drop to 200 degrees. When you pick up the flask again, it will take much less time to heat it up to the previous temperature. Thanks to this, the power consumption drops, the soldering tip wears out much more slowly. It is possible to disable this function by setting the time to 0. - Auto shutdown function The soldering station goes into sleep mode to save energy, if it is not woken up from it, it can automatically shut down. Time setting range: 1 to 99 minutes in 1-minute increments. - Temperature compensation function There are different arrowheads, some are long and thin others are short and thick which leads to different thermal conductivity of these arrowheads and therefore different temperatures at their tips. Here the temperature compensation function comes to the rescue, thanks to it we can correct the excess or deficiency of temperature in the range of ±50 degrees. A useful function especially in professional applications. - The flask of the soldering iron has a special design so that the binder enters the tin container in a molten state, this increases the efficiency of work and reduces the frequency of regular maintenance. Specifications: - Power supply: 230V - Suction gun: 75W - Soldering flask: 60W - Temperature range: 200°C-480°C - Display: LED - Temperature stability: ±1°C - Heating element voltage: AC 26V ±10% - Compressor power: 12W - Vacuum power: max .12Mpa - Ground resistance on the mainsheet: less than 2 ohm DC - Dimensions: 234x202x134 (L x W x H) - Cable length of about 120 cm Included: - WEP 948 2-in-1 station - Soldering gun with attached - Blade flask with conical tip - Spare filters - 2 pcs. white - 4 pcs. black - Spare nozzle for the blowtorch flask 1pcs - Spare spring filters 2pcs. - Pin - Blade cleaning snips of different thicknesses - Power cord YH/WEP948 soldering station, 75W soldering iron + 60W soldering tip The WEP 948 soldering station has the functions of a tin desoldering machine and a soldering tip. With powerful heating elements, it allows you to quickly and conveniently solder / desolder all electronic components. Soldering iron built with ESD standards in mind, so you can be sure that you will not damage electronic components during service. The WEP 948 soldering station corrects the set temperature in real time, thanks to the precise PID controller, this makes the soldering station has a high temperature stability, even with large fluctuations in heat take-up. The station's power supply is based on a transformer with good insulation of heating elements, this makes it possible to achieve high reliability and safe operation. The device has the following functions: - C/F operation. The ability to set on the display in which units the temperature will be displayed. - Sleep function The grotto flask takes a long time to heat up, and each time warming up and cooling down would generate a lot of wasted time. Therefore, a sleep function has been added to the station, thanks to which, after putting the flask on the stand, the flask after a predetermined time(60 seconds to even 99minutes) will go into sleep mode, and the temperature will drop to 200 degrees. When you pick up the flask again, it will take much less time to heat it up to the previous temperature. Thanks to this, the power consumption drops, the soldering tip wears out much more slowly. It is possible to disable this function by setting the time to 0. - Auto shutdown function The soldering station goes into sleep mode to save energy, if it is not woken up from it, it can automatically shut down. Time setting range: 1 to 99 minutes in 1-minute increments. - Temperature compensation function There are different arrowheads, some are long and thin others are short and thick which leads to different thermal conductivity of these arrowheads and thus different temperatures at their tips. Here the temperature compensation function comes to the rescue, thanks to it we can correct the excess or deficiency of temperature in the range of ±50 degrees. A useful function especially in professional applications. - The flask of the soldering iron has a special design so that the binder enters the tin container in a molten state, this increases the efficiency of work and reduces the frequency of regular maintenance. Specifications: - Power supply: 230V - Suction gun: 75W - Soldering flask: 60W - Temperature range: 200°C-480°C - Display: LED - Temperature stability: ±1°C - Heating element voltage: AC 26V ±10% - Compressor power: 12W - Vacuum power: max .12Mpa - Ground resistance on the mainsheet: less than 2 ohm DC - Dimensions: 234x202x134 (L x W x H) - Cable length of about 120 cm Included: - WEP 948 2-in-1 station - Soldering gun with attached - Blade flask with conical tip - Spare filters - 2 pcs. white - 4 pcs. black - Spare nozzle for the blowtorch flask 1pcs - Spare spring filters 2pcs. - Pin - Blade cleaning snips of different thicknesses - Power cord