GS 18 electric tapping machine

Reverse gearing enables very short machining times: pressure on the spindle triggers a slow clockwise rotation of the tool, during withdrawal a fast winding at 680 rpm is automatically startedEasy threading in one operation thanks to high torque, low speed and high concentricityAdditional handle for optimal and comfortable tool guidanceCompensation of angular misalignment of the cutting tool in the hole thanks to the connection between the feed inlet and the threaded chuckStandard depth stop for blind holes With reverse gear for time-saving, precise thread cutting in holes Reverse gear enables very short machining times: pressure on the spindle triggers a slow clockwise rotation of the tool, during retraction a high-speed winding is automatically started at 680 rpmEasy threading in one operation thanks to high torque, low speed and high concentricityAdditional handle for optimal and comfortable guidance of the toolCompensation of angular misalignment of the cutting tool in the hole thanks to the connection between the feed inlet and the threaded chuckStandard depth stop for blind holesDimensions and weights. Length (product) approx: 400Width/depth (product) approx: 325Height (product) approx: 240Weight (net) approx: 3.15Explanation of dimensions: Additional handle in 90° position to the handleDrive power. Input power: 0.45. Speed range. Idle speed (y) (clockwise): 280Speed (y) at idle (counterclockwise rotation): 680Speed (y) under load (clockwise): 170Speed (y) under load (counterclockwise rotation): 410Electrical data. Power supply voltage: 220 - 240Power frequency: 50/60. Thread cutting. Thread cutting steel (S235JR) Short run: M18. Thread cutting steel (S235JR) Continuous work: M14. Thread cutting Aluminum Short run: M18Thread cutting Aluminum Continuous work: M16. Electrical connection. Connection cable length: 3Expert information. Slipper clutch parking torque release: 31.4 - 34.3Explanation of slip clutch parking torque trigger: Information for M16 thread diameter