TIG welding machine Stainless/Aluminum 200A 230V.

TIG welding machine Stainless/Aluminum 200A 230V. The THF series devices by Magnum are professional inverter welders designed for manual electric TIG welding.The devices can also be used for MMA welding with electrodes. They are designed for all kinds of welding work in locksmith workshops,repair shops, industrial workshops, factories, etc.The devices are equipped with a "soft" clear panel that allows you to set all the necessary welding functions (start/crater filling/welding/base current, current rise and fall times, gas discharge before and after welding, pulse frequency, balance, etc.).The current source has been built on IGBT transistors to ensure minimum electromagnetic interference, low power loss in the basic circuits, enabling increased efficiency and reliability of the current source.Very high efficiency, directly translating into lower power consumption, and high switching frequency, ensure instantaneous current adaptation to parameter changes during welding. Inverter TIG THF 220 AC/DC welder - equipped with the necessary wiring. The device is dedicated to work in repair and production workshops. Ideal for repairing aluminum rims, air conditioning tubes and welding stainless steel balustrades.The device is fully digitally controlled, has a soft touch panel so that the welder can freely and accurately set the working parameters.Puls - allows welding very thin parts, reducing the linear energy of the arc, and thus reducing overheating or burning of welded materials.HF - the device is equipped with an ionizer, which allows a non-contact view of the welding arc.PRE and POST GAS - gas discharge before and after welding.UP and DOWN SLOPE - rising and falling welding current.. Price for unit with complete set of TIG MMA accessoriesTIG welding handle 26 MMA electrode cable MMA electrode cablemass cablespare parts for handle . TECHNICAL PARAMETERS:TIG Welding Current: 5-200AMMA welding current 10-160AEfficiency; 60%Single-phase power supply 230VSafety rating 25AWeight 9 KGDigital parameter display2-bar and 4-bar functions for TIG weldingAC - AC TIG welding,AC PULS - AC TIG welding with PULS function,DC - DC TIG welding,DC PULS - DC TIG welding with PULSMMA function - MMA welding.All TIG parameters: gas before, initial current, welding current rise time, welding current, base current, welding current fall time, final welding current, pulse frequency, pulse width, balance-AC, AC frequency, etc.MMA welding with 1.6 - 4.0 mm diameter electrodes (Arc Force, Hot Start)IGBT technology. TIG WELDING PARAMETERS Welding current: 5 - 200AGas before: 0 - 10 sGas after : 0- 3 0sCurrent rise: 0 - 10 s | Current fall: 0 - 10 s- Time - adjustment of welding time at a point, adjustment range 0.5÷10 seconds. - AC Hz - adjustment of polarity change frequency for TIG AC method, adjustment range 20÷250 hertz. - Puls Hz - adjustment of welding current pulsation frequency for TIG method with PULS function. The adjustment is divided into two ranges: 0.2÷20.0 Hz and 21÷200 Hz. - Puls % - adjustment of welding current pulsation balance for TIG method with PULS function. The adjustment is carried out in two ranges depending on the set frequency: 0.2 Hz÷10 Hz - 1÷99 % 11 Hz÷200 Hz - 10÷90 %. AC balance - adjustment of the polarity change balance for the AC TIG method. The adjustment range is limited and enforced by the other parameters (welding current and AC frequency). The extreme ranges are 15÷85%.Arc Initiation: TIG HF / TIG LiftMMA WELDING PARAMETERS: Welding current: 10 - 160A Application:Hand TIG welding of aluminum and its alloysHand TIG welding of copper and its alloys-Hand TIG welding of alloy steels also stainless steelHand TIG welding of ordinary and high strength structural steelsHand welding with covered electrodes of, of structural steels of ordinary and higher strengthhand welding with covered electrodes of cast iron for cold and hot-welding with covered electrodes of alloyed steels also stainless steelfor semi-professional and professional application