Ideal Tecnomig 200/2 IGBT MMA 230/400V welding machine

Ideal Tecnomig 200/2 IGBT MMA 230/400V welding machine TECNOMIG 200/2 IGBT MMA is a semi-automatic welding machine designed for welding low-carbon steel, low-alloy steel (MAG), alloy steel (MIG), aluminum and its alloys, and has the ability to weld with covered electrodes (rutile, basic, acid - MMA).This device is used in locksmith workshops as well as in repair shops. It allows welding with steel welding wires with a diameter of 0.6-0.8 mm, as well as self-shielded wires (welding "without gas") and electrodes with a diameter of 1.6-4 m. MIG 200 IGBT MMA is a device adapted for power supply from a single-phase network 230 V, 50 Hz/ 400V . This device is equipped with an overload thermal protection system to prevent excessive overheating.The MIG 200/2 IGBT MMA equipment is based on the latest, most advanced technology, using IGBT transistors.Thanks to their special design, Insulated Gate Bipolar Transistor (IGBT) power transistors are a more favorable solution in many respects, and in many applications are a better solution than traditional MOSFETs.A source based on IGBT transistors offers a stronger, more concentrated and more stable arc while consuming less power. It provides a minimum of electromagnetic interference, low power loss in the base circuits allowing increased efficiency and reliability of the current source.The features of these transistors are very high efficiency, translating directly into lower power consumption, high switching frequency, providing instantaneous adjustment of current to changes in parameters during welding.. It is designed for all kinds of welding work, in locksmith workshops,repair shops, industrial workshops, factories, etc.The current source is built on IGBT transistors to ensure a minimum of electromagnetic interference, low power loss in the basic circuits, allowing increased efficiency and reliability of the current source, lower power consumption, and instant adjustment of current to changes in parameters during welding.Because of its light weight and size, it is ideally suited for:construction companiescar repair shopsfirmsfirmshousehold. The set includes:MIG 200/2 MMA IGBTMIG chuck 3 metersMass holderElectrode holderElectrode holderAdapter 400v/230vWelding holder consumables . Specifications:Idle voltage: 56 VMaximum current: 200 ACurrent at 100% operation: 130ACurrent at 60% duty: 200A(MIG) / 180A(MMA)Aluminum wire diameter: 0.8 - 1.0 mmSelf-stripping wire diameter: 0.8 - 1.2 mmSteel wire diameter: 0.6 - 1.0 mmWelding electrode diameter: 1.6 - 4.0 mmWelding current adjustment steps: Infinitely variableWelding current adjustment range: 30 - 200 AWeIGHT 15KG.