SEMI-AUTOMATIC WELDING MACHINE MAGNUM MIG 145 NO GAS

SEMI-AUTOMATIC WELDING MACHINE MAGNUM MIG 145 NO GAS The MAGNUM MIG 145 W series device is a semi-automatic welding machine powered by 230V single-phase mains with a maximum welding current of 120A. It is designed for manual electric welding of steel with self-cored wire (FCAW Flux-Cored Arc Welding method). The FCAW method is arc welding with flux-cored (powder) wire. It is a welding method similar to the MIG/MAG method, except that the wire is internally filled with flux or a chemical that produces protective gases during welding. FCAW welding combines the advantages of both covered electrode welding and MAG welding. The current source is built on IGBT transistors that ensure minimum electromagnetic interference, low power loss in the basic circuits, enabling increased efficiency and reliability of the current source, lower power consumption, and instantaneous current adjustment to changing parameters during welding. The device is designed for small welding jobs in repair shops, farms, etc. SET INCLUDES:MIG 145 unit,MIG/MAG working cable,Mass cable,Instruction manual.Torch consumables Welding discBrush hammer. MAG WELDING PARAMETERS:Welding current: 50 - 120 [A]Welding voltage: 15.5 - 20 [V] TECHNICAL DATA:Power supply: AC 230 [V], 50 [Hz],Required protection: 20 [A]Efficiency: 60 [%]Idle voltage: 55 [V],Wire spool diameter: D100 [mm]Wire spool weight: max: 1 [kg]Wire diameter: 0.8/0.9 [mm]Casing protection class: IP23Weight: 5 [kg].