MIG welding machine PRAKTIK 211 Digital IDEAL MIGOMAT KIT 2.

MIG welding machine PRAKTIK 211 Digital IDEAL MIGOMAT KIT 2. The PRAKTIK MIG 211 Digital single-phase powered semi-automatic welding machine made with IGBT inverter technology for MIG/MAG (gas-shielded) or FLUX (non-gas-shielded) welding and welding with direct current (DC) covered electrodes.Designed for welding with 0.6-1.0 mm welding wires, 0.9 mm self-shielded wires, and covered electrodes up to 4 mm in diameter of low-carbon steel, low-alloyed steel (MAG), alloyed steel (MIG), aluminum, and cast iron.Max spool of 5 kg D200.The PRAKTIK MIG 211 semi-automatic machine has: display of welding current parameters LED indicator lights: (green) overload (red) electronically controlled infinite welding current adjustment electronically controlled infinite wire feed speed adjustment overload protection. Designed for workshop and field work. ONE OF THE MOST CHOSEN HOME & WORKHOUSE APPLIANCES. ADVANTAGES OF THE DEVICE EURO 3M welding chuck WELDING CURRENCY 30-.200 A Manual parameter adjustment INDUCTIVITY REGULATION Low weight and mobility of the machine Space for gas cylinders. gas cylinderPossibility to weld without gasKIT READY TO WORKWire ejection button Clear and easy to use control panel Inverter semi-automatic welding machine recommended for sheet metal and workshop applications.Allows MIG-MAG welding with gas-shielded welding wire, FLUX welding wire with self-consuming welding wire and MMAProvides the ability to change the polarity of the handle for welding with self-consuming wire.Single-phase power supply.For welding by MIG-MAG method, it is possible to regulate: welding current, wire feed speed.Wire feeder: 2-roll, with 0.6-0.8 roll for steel wire.Fan-cooled.Overload protection.IGBT - the welder uses modern transistors, a solution to ensure a minimum of electromagnetic interference low power loss in the basic circuits, allowing to increase the efficiency and reliability of the power source.FCAW - the ability to weld core wire without using a gas cylinder. The wire itself (FLUX) is filled with a substance that produces gases during welding.Inductance Adjustment - allowing less heat to be introduced into the welding area. The sheet metal does not deform and the protective layer of zinc is not damaged, useful in lute welding. The price of the device with a set of MIG / MMA accessories:Welding clamp MB 15/3Ground cable with clamp 200A - 1.5MElectrode cable 200A - 1,5Mpower cable with 230V plugshort for 8 mm hose for gas line connectionwelding shieldgas hoseNew 8l cylinder filled with CO2/AR Painted according to Polish Standard. Cylinders filled. Very lightweight and efficient. Cylinders and valves comply with EN 1964-1. Legalization 10 yearsWelding wire Sg2 0.8/5 K GWelding splatter sprayWelding glovesWelding handle consumablesReducer mini2 welding angles 12 Kg. Power supply protection: C25APower supply voltage: 230 V; 50Hz (1ph)Power: 5.5 kWIdle voltage: 43 VMaximum current: 200 ACurrent at 100% operation: 130 ACurrent at 60% operation: 200 A (MIG) / 180 A (MMA)Aluminum wire diameter: 0.8 - 1.0Self-stripping wire diameter: 0.8 - 0.9Self-stripping wire diameter: 0.6 - 1.0Stainless steel wire diameter: 0.6 - 1.0Welding electrode diameter: 1.6 - 4.0Welding current adjustment range: 30 - 200 AWire spool size: D100 (0.45kg and 1kg), D200 (2kg and 5kg)Protection rating: IP21SWeight: 16kgSize dimensions L x W x H: 470x225x335 mmPackaging dimensions L x W x H: 570x245x355 mm