Inverter MMA/TIG ARC 230A 80% WELDMAN Welder The ARC 230 inverter welder for direct current (DC) covered electrode welding and TIG lift.Designed for welding with rutile and basic electrodes up to 5 mm of various steels (low-carbon, low-alloy, stainless, etc.) and cast iron.The welder has a digital display of welding current.LEDs on the front panel indicate power connection (green LED) or shutdown due to overload (red LED).Electronically controlled stepless welding current control.Overload protection.The welder has functions to facilitate welding:- HOT START (hot start): increases the welding current during arc ignition to facilitate electrode ignition- ARC FORCE (arc dynamics): shortens the arc length when increasing the welding current optimizing the transfer of molten electrode droplets to the material being welded, preventing the arc from being extinguished when the electrode comes into contact with the material being welded- ANTI STICK: limits the welding current preventing the electrode from sticking to the material being weldedThe welder can TIG weld when connected to a gas valve holder. Touch ignition of the welding arc due to rubbing the tungsten electrode against the material to be welded (TIG Scratch).Small and lightweight design makes the device applicable for repair work in workshop conditions as well as for work in the field.Transport is facilitated by equipping the welder with a shoulder strap.. The welder comes with the following equipment:. power cable 2 m with 230V plug. welding cable 2 m with 200A electrode holder (DX50). 1.6 m ground wire with 200A clamp (DX50). welding disc- hammer for plinking. Small and lightweight design makes the device applicable for repair work in workshop conditions as well as for work performed in the field.Transport is facilitated by equipping the welder with a shoulder strap.WeIGHT ONLY 7KGTechnical dataCode:103 011Device type:ARC 230Power supply voltage [V]:230Idle current voltage [V]:56Welding current adjustment range [A]:20-230Capacity max at 40°CEN 60974-1230A@80%205A@100%Electrode diameter [mm]:2-5Max. Power consumption [kVA] :8.3Protection class [IP]:21Dimensions [cm]:41x12x24Weight [kg]:5