Inverter MMA/TIG Welder ARC 207 WALKER ZEST. The ARC 207 inverter welder for direct current (DC) covered electrode welding and TIG lift.Designed for welding with rutile and basic electrodes up to 5 mm of various steels (low-carbon, low-alloy, stainless, etc.) and cast iron.The welder has a digital display of welding current.LEDs on the front panel indicate power connection (green LED) or shutdown due to overload (red LED).Electronically controlled stepless welding current control.Overload protection.The welder has functions to facilitate welding:- HOT START (hot start): increases welding current during arc ignition to facilitate electrode ignition- ARC FORCE (arc dynamics): shortens the arc length when increasing the welding current optimizing the transfer of molten electrode droplets to the material being welded, preventing arc extinction when the electrode comes into contact with the material being welded- ANTI STICK: limits the welding current preventing the electrode from sticking to the material being weldedThe welder can TIG weld when connected to a gas valve holder. The touch ignition of the welding arc due to rubbing the tungsten electrode against the material to be welded (TIG Scratch).Technical dataCode: 103 013Device type: ARC 207Power supply voltage [V]: 230Idle current voltage [V]: 56Welding current adjustment range [A]: 20-200Electrode diameter [mm]: 2-4Protection class [IP]: 21Dimensions [cm]: 38×12.5×24Weight [kg]: 5.5. The welder comes with the following equipment:. power cable 2 m with 230V plug. welding cable 2 m with 200A electrode holder (DX25). 1.6 m ground wire with 200A clamp (DX25). welding disc. probing hammer. aluminum carrying case. WELDMAN SP-550 visor. - Infinitely adjustable darkness/sensitivity. - Infinitely adjustable delay/brightening time. - Grind function- TEST function- Battery indicator- Power supply- Solar cell + AAA (replaceable). WELDING HANDLES . RUTYL ELECTRODES 3.2\ 5 KG. Small and lightweight design makes the device applicable for repair work in workshop conditions as well as for work performed in the field.Transport is facilitated by equipping the welder with a shoulder strap. WeIGHT OF ONLY 7KG. WeIGHT OF ONLY 7KG.