MIGOMAT MAGNUM MIG 145 NO GAS Welder Set.

MIGOMAT MAGNUM MIG 145 NO GAS Welder Kit. The MAGNUM MIG 145 W j series is a pautomatic welding machine powered from a 230V single-phase mains with a maximum welding current of 120A. It is designed for manual electric welding of steel with self-cored wire (FCAW Flux-Cored Arc Welding method). The FCAW method is arc welding with flux-cored (powder) wire. It is a welding method similar to the MIG/MAG method, except that the wire is internally filled with flux or a chemical that produces protective gases during welding. FCAW welding combines the advantages of both covered electrode welding and MAG welding. The current source is built on IGBT transistors that ensure minimum electromagnetic interference, low power loss in the basic circuits, enabling increased efficiency and reliability of the current source, lower power consumption and instantaneous current adjustment to changes in parameters during welding. The device is designed for small welding jobs in repair shops, farms, etc. BENEFITS OF THE WELDERWelding handle 2MREADY TO USE Welding current 160AInverter technology IGBTWelding without gas -. FLUXPossibility of manual setting of welding parametersSmall dimensions of the device WEIGHTING ONLY 5 KGWelding handle permanently mountedFan coolingThe device is equipped with overload protectionFCAW - the possibility of welding with cored wire without using a gas cylinder. The wire itself (FLUX) is filled with a substance that produces gases during welding.. SET INCLUDES:MIG 145 machine,MIG/MAG working cable,Mass cable,Instruction manual.2 12 KG welding angles Welding discBrush hammerTor consumables Core wire 0.5 KG. MAG welding PARAMETERS:Welding current: 50 - 120 [A]Welding voltage: 15.5 - 20 [V] TECHNICAL DATA:Power supply: AC 230 [V], 50 [Hz],Required protection: 20 [A]Efficiency: 60 [%]Idle voltage: 55 [V],Wire spool diameter: D100 [mm]Wire spool weight: max: 1 [kg]Wire diameter: 0.8/0.9 [mm]Casing protection class: IP23Weight: 5 [kg].