Electrode inverter 253

All units are built with modern inverter technologyBest for installation work (on ladders, scaffolding, ...) and thanks to IP 21S protection class generally also for outdoor workSuitable for use around a generator, such as. in workshops, ports, chemical plants, schools, metal structures, construction sites, ships or for farmersProtects against moisture, salt spray and corrosion thanks to the sealed circuit board. That's why it is also suitable for offshore workHot Start:Thanks to an adjustable, brief increase in welding current, the arc ignites safely and is instantly stableAnti-stick: If the electrode accidentally sticks, the welding current is automatically reduced, preventing electrode annealingWG DC LiftArc ignitionArc strength control:Internal monitoring of welding current and voltage quickly and safely resolves short circuits. Adjustable current rise stabilizes the arc, and the electrode can be processed without problems.VRD (Voltage Reducing Device):Voltage reduction for no-load operation. 400 V model in standard version with sealed circuit board All units are built with modern inverter technologyBest suited for installation work (on ladders, scaffolding, ...) and thanks to IP 21S protection class generally also for outdoor workSuitable for use at the generator, such as. in workshops, ports, chemical plants, schools, metal structures, construction sites, ships or for farmersProtects against moisture, salt spray and corrosion thanks to the sealed circuit board. That's why it is also suitable for offshore workHot Start:Thanks to an adjustable, brief increase in welding current, the arc ignites safely and is instantly stableAnti-stick: If the electrode accidentally sticks, the welding current is automatically reduced, preventing electrode annealingWG DC LiftArc ignitionArc strength control:Internal monitoring of welding current and voltage quickly and safely resolves short circuits. Adjustable current increase stabilizes the arc, and the electrode can be processed without problems.VRD (Voltage Reducing Device): Reduces the voltage during no-load operation. Dimensions and weights. Length (product) approx: 495Width/depth (product) approx.: 190. Height (product) approx: 350Weight (net) approx.: 11.8. Regulation range. Electrode adjustment range: 20 - 250TIG setting range: 20 - 250Work cycle. Operating cycle at max current 40°C Electrode: 60. Operating cycle at max current 40°C DC TIG: 60. Current at ED 100% 40°C Electrode: 200. Current at ED 100% 40°C TIG DC: 200. Electrical data. Power supply voltage: 400±10%Power frequency: 50/60. Electrode. Weldable electrodes: 1.6 - 5.0Standards and approvals. Standard: EN 60974-1:2012, EN 60974-10:2014. EMC class: A. Explanation EMC Class: This Class A welding device is not intended for use in residential areas where power is supplied by a public low-voltage power system. Identification. Identification: CE. Power consumption. Electrode power consumption: 8.5Dc TIG power consumption: 6.3. Electrical connection. Required generator power: >10. Additional line voltage tolerance: 10Negative line voltage tolerance: 10Open circuit voltage: MMA 70.1/ TIG 69.4 Open circuit voltage. Power cord length: 2.2Electrode current consumption: 17.7TIG power consumption: 13.1Electrode total power consumption: 10TIG total output: 7.4