TIG 181 DC Inverter

All units are built with modern inverter technology Ideally suited for assembly work (on a ladder, on scaffolding, ... ) and, thanks to the IP 21 S degree of protection, generally also for outdoor work Accurate setting of welding parameters by means of a digital display Universal application for welding with all common types of electrodes Suitable for use with a generator, for example. in factory workshops, schools, metal constructions, construction sites or for farmers TIG pulses enable welding with reduced heat input High-frequency HF ignition causes ignition during TIG welding without touching the material to be welded Quiet running fan dissipates heat from the unit, thus ensuring a long duty cycle Two-year warranty from Schweißkraft. For workshop and mobile applications All units are built with modern inverter technology Ideally suited for assembly work (on a ladder, on scaffolding, ... ) and, thanks to the IP 21 S protection rating, generally also for outdoor work Accurate setting of welding parameters by means of a digital display Universal application for welding with all common types of electrodes Suitable for use with a generator, for example. in factory workshops, schools, metal constructions, construction sites or for farmers TIG pulses enable welding with reduced heat input High-frequency HF ignition causes ignition during TIG welding without touching the material to be welded A quiet running fan dissipates heat from the unit, thus ensuring a long duty cycle Two-year warranty from Schweißkraft. Dimensions and weights. Length (product) approx: 430Width/depth (product) approx.: 150. Height (product) approx: 280Weight (net) approx: 7.3Range of adjustment. TIG setting range: 10 - 180Electrode adjustment range: 10 - 180Work cycle. Current max 40°C TIG duty cycle: 40Operating cycle at max current 40°C Electrode: 40. Current at ED 100% 40°C TIG: 100Current at ED 100% 40°C Electrode: 100. Electrical data. Power supply voltage: 230±10%Power frequency: 50/60. Power factor: 0.6. DCDC TIG power consumption: 28.8. Electrode DC power consumption: 42.6. Electrode. Weldable electrodes: 1.6 - 4.0Data of device. Ignition: high frequency. Torch cooling: GasBasic functions. Procedure: li>li>Electrode welding. Plate thickness: WIG from about 0.5 mmelectrodes from about 2 mmBasic materials: low-alloy low-alloy materialshigh-alloy materials> stainless steels> CrNi-steel ferritic/austenitic steels >/li> >li> duplex steels >/li> >li> nickel-based materials >/li> >li> copper materials >/li> >/ul>. Typical applications: repair industrial plant and pipeline construction construction site and assembly . Standards and approvals. Standard: EN 60974-1:2012, EN 60974-10:2014. EMC class: A. Explanation EMC Class: This Class A welding device is not intended for use in residential areas where power is supplied by the public low-voltage power supply system. The EMC Class: A. Power consumption. TIG energy consumption: 3.9Electrode energy consumption: 5.9. Electrical connection. Required generator power: >9.8. Additional line voltage tolerance: 10Negative grid voltage tolerance: 10Open circuit voltage: MMA 75.5 / TIG 92.6 Open circuit voltage. Power cord length: 2.2