Multifunction inverter 350

Hot Start FunctionAssists in igniting the rod electrode arc during electrode welding. By automatically increasing the welding current briefly, the arc immediately ignites stably.Arc Force ControlDuring electrode welding, the welding power is kept as constant as possible and at the set value. The arc burns steadily, even with difficult electrodes or positions, the welding result is more even.Anti-stick functionWhen the electrode sticks to the workpiece, the welding current is turned off. The electrode does not glow and can be easily detached from the workpiece.Pulses in TIG function with pulse boxWith the help of pulses, welding errors are avoided at the beginning and end of the seam, such as when welding pipes. MIG welding without cylindersMore application area thanks to the possibility of using filler wires, which allows MIG welding e.g. on construction sites without gas cylinders, a big plus for mobility.Arc ignitionArc ignition during TIG welding at minimum current. Only after the arc is ignited is the set welding current released.Electronically adjustable throttle valveFor optimum arc setting as needed from hard to soft.. For MIG/MAG, TIG and electrode welding. Lightweight and durable, ideal for use on construction sites Hot Start FunctionAssists in igniting the rod electrode arc during electrode welding. By automatically increasing the welding current briefly, the arc immediately ignites stably.Arc Force ControlDuring electrode welding, the welding power is kept as constant as possible and at the set value. The arc burns stably, even with difficult electrodes or positions, the welding result is more even.Anti-stick functionWhen the electrode sticks to the workpiece, the welding current is turned off. The electrode does not glow and can be easily detached from the workpiece.Pulses in TIG function with pulse boxWith the help of pulses, welding errors are avoided at the beginning and end of the seam, such as when welding pipes. MIG welding without cylindersMore application area thanks to the possibility of using filler wires, which allows MIG welding e.g. on construction sites without gas cylinders, a big plus for mobility.Arc ignitionArc ignition during TIG welding at minimum current. Only after the arc is ignited is the set welding current released.Electronically adjustable throttle valveFor optimum arc setting as required from hard to soft.. Dimensions and weights. Length (product) approx: 760Width/depth (product) approx: 228Height (product) approx: 475Weight (net) approx: 26.5Range of adjustment. MIG/MAG setting range: 15 - 350. Electrode adjustment range: 5 - 320DCTIG DC setting range: 5 - 320. Work cycle. Work cycle at 40°C max current MIG/MAG: 40. Operating cycle at max current 40°C DC TIG: 60. Operating cycle at max current 40°C Electrode: 40. Current at ED 100% 40°C MIG/MAG: 230. Current at ED 100% 40°C DC TIG: 260. Current at ED 100% 40°C Electrode: 230. Electrical data. Power supply voltage: 3 x 400Power frequency: 50/60. Electrode. Weldable electrodes: 1.6 - 6.0Basic functions. Procedure: MIG/MAGTIG DC with LIFT-ARCWelding electrodesCore wire welding without gas. Plate thickness: TIG from about 1 mmMIG/MAG from about 1 mmElectrodes from about 2 mmBasic materials: Low-alloyed materialsHigh-alloyed materialsStructural steelsCoated structural steelsCrNi ferritic / austenitic steelsDuplex steelsNickel-based materialsCopperAluminumSpecial materials. Typical applications: Construction of plants, containers, machinery and steel structuresMaintenance/repairConstruction of vehicles/construction machineryConstruction of industrial plants and pipelinesConstruction and assembly. Standards and approvals. Standard: EN 60 974-1; -10. EMC class: A. Explanation EMC Class: This Class A welding device is not intended for use in residential areas where power is supplied by a public low-voltage power system. Identification. Identification: CE, S. Wire feeder. Wire supply unit: 4Power consumption. MIG/MAG power consumption: 8.6. DCTIG power consumption: 7.8. Electrode power consumption: 9.8Electrical connection. Additional mains voltage tolerance: 10Negative line voltage tolerance: 10Open circuit voltage: 75