MMA welder MAGNUM SNAKE MAGNUM SNAKE 230 Profi Soft

Snake 230 PROFI Soft Digital devices are based on the latest, most advanced technology, using IGBT transistors. Snake 230 PROFI Soft Digital also has an ARC FORCE function - "arc dynamics". - Shortening the arc length is accompanied by an increase in welding current, which stabilizes the arc, regardless of its length. Decreasing the value of the function gives a soft arc and a shallower depth of fusion, while increasing the value of the function results in deeper fusion and the possibility of short arc welding. The operation of the ARC FORCE function is to increase the power delivered to the arc when a droplet of molten metal short-circuits the electrode and the material, causing the droplet to move quickly and preventing short-circuiting. When the ARC FORCE function is set to a high value, you can weld by "pushing" the electrode into the molten metal pool, maintaining a minimum arc length and high electrode melting speed. The device also has a HOT START function, which consists in momentarily increasing the welding current above the set value at the moment of arc ignition, This prevents the phenomenon of "sticking " of the electrode in the initial phase of welding, making it easier to start the whole process. Why you should buy: Single-phase power supply 230V Weight 7.4 kg Maximum welding current 230A Duty cycle 60% (230A) Electronics protection systems Digital control MMA leads included Full technical specifications Power supply voltage 1x230V 50 Hz MMA welding methods Welding current 20-230A Duty cycle 60% 70V idle voltage Current protection 25A Max. power consumption 7,4 kVa MMA electrode diameter 1.6 - 5.0mm Weight 7.4 kg EQUIPMENT Welder MAGNUM Snake 230 PROFI SOFT Mass cable Electrode cable User manual