WELDMAN ARC 207 INVERTER WELDER CASE

Weldman ARC 207 inverter welder is designed for welding with rutile and basic electrodes (DC current) up to 4 mm of various steels (low carbon, low alloyed, stainless, etc.) and cast iron. Weldman ARC 207 inverter welder is designed for welding with rutile and basic electrodes (DC current) up to 4 mm of various steels (low carbon, low alloyed, stainless, etc.) and cast iron. It has a digital display of welding current, equipped with a simple lamp system. LEDs on the front panel indicate that the machine is connected to power (green LED) or that it is switched off due to overload (red LED). The electronically controlled infinitely variable welding current control and special equipment overload protection also work during operation. Features that make welding easier: Hot Start (hot start): increases the welding current at arc ignition to facilitate electrode ignition Arc Force (arc dynamics): shortens the arc length when increasing the welding current optimizing the transfer of molten electrode droplets to the material being welded, preventing arc extinction when the electrode comes into contact with the material being welded Anti Stick: limits the welding current by preventing the electrode from sticking to the material being welded The ARC 207 inverter welder can TIG weld when connected to a gas valve holder. The welding arc is triggered by rubbing the tungsten electrode against the material to be welded (TIG Scratch). Small and lightweight design makes the welder applicable for repair work in workshop conditions as well as for work in the field. The welder is easy to transport and is equipped with a sturdy shoulder strap. Standard equipment: 2 m cable with 200 A electrode holder (DX25) 1.6 m cable with ground clamp 300 A (DX25) welding mask 2 m power cord with 230 V plug plastic carrying case Max. welding current [A] 200 Welding current range [A] 20 - 200 A Current [A] / duty cycle [%] 200 A / 60%; 155 A / 100% Power supply [V] 230 Idling voltage [V] 56 Degree of protection IP21S Features - MMA welders Fi diameter [mm] up to 4.0 Current regulation Smooth Anti Stick function Yes Arc Force function Yes Hot start function Yes Physical parameters Weight 5.5 kg Height 240 mm Width 125 mm Length 380 mm