Digital oscilloscope 150MHz, 4 channels

The UPO3154E is a four-channel digital oscilloscope manufactured by Uni-t. The UPO3154E oscilloscope is equipped with Ultra Phosphor display technology realizing the function of up to 256 levels of display intensity which is a reference to analog oscilloscopes (phosphor). Each input channel of the oscilloscopes has a bandwidth of 150MHz. The converter's sampling rate of up to 2.5GSa/s, memory record length of up to 70M samples, very high refresh rate of up to 200,000 waveforms/second will meet the requirements of the most demanding users. Features and parameters: - UPO3154E digital oscilloscope made by Uni-t - UPO3154E Unit four-channel digital oscilloscope - four input channels: CH1 CH2 CH3 CH4 - bandwidth of input channels: 150MHz - real-time A/D converter sampling: 2.5GSa/s - 2.5GSa/s - when using 1 channels - 1.25GSa/s - using two channels - 1.25GSa/s - using four channels built-in 2 A/C converters - separate for channel: 1/2 and 3/4 - memory record length: 70Mpts = 70 millin points - vertical resolution of A/D converter: 8bit - voltage sensitivity from 1mV/div to 10V/div - waveform capture rate: up to 200,000 wfm/s - independent time base on each channel Ch1 Ch2 Ch3 Ch4 - possibility to set individual time base on each channel example: Ch1 20ms / Ch2 200µs / Ch3 20µs / Ch4 2µS - possibility to divide the screen into 4 separate parts - oscilloscope display:- large display with a diagonal of 8 inches - displayed resolution: 800x480 - TFT screen with 16M colors and 24 bit - supports 256-level waveform intensity scale in mono color mode ~ analog to phosphor as in analog oscilloscopes - mathematical operations - FFT spectral analysis - extensive triggering system more than 14 types of triggering: Edge , Pulse Width, Video , Slope , Overtime , Window , Pattern , Interval , Under Amp, UART , LIN , CAN , SPI , IIC I2C - possibility to trigger with digital signals - serial buses - cursor measurements - automatic measurements: measurement of 34 parameters - saving and reading of waveforms to *.csv files - Pass/Fail function - Auto Scale function - so called AUTO function - self-adjusting - setting oscilloscope parameters - built-in communication interfaces: - USB Host - communication with computer - USB Device - pendrive memory support - LAN - VGA - Windows PC software - SCPI remote control command support - serial bus decoding: RS232, UART, I2C, SPI, LIN, CAN The UPO3154E is a four-channel digital oscilloscope manufactured by Uni-t. The UPO3154E oscilloscope is equipped with Ultra Phosphor display technology realizing the function of up to 256 levels of display intensity which is a reference to analog oscilloscopes (phosphor). Each input channel of the oscilloscopes has a bandwidth of 150MHz. The converter's sampling rate of up to 2.5GSa/s, memory record length of up to 70M samples, very high refresh rate of up to 200,000 waveforms/second will meet the requirements of the most demanding users. Features and parameters: - UPO3154E digital oscilloscope made by Uni-t - UPO3154E unit four-channel digital oscilloscope - four input channels: CH1 CH2 CH3 CH4 - bandwidth of input channels: 150MHz - real-time A/D converter sampling: 2.5GSa/s - 2.5GSa/s - when using 1 channels - 1.25GSa/s - using two channels - 1.25GSa/s - using four channels built-in 2 A/C converters - separate for channel: 1/2 and 3/4 - memory record length: 70Mpts = 70 millin points - vertical resolution of A/D converter: 8bit - voltage sensitivity from 1mV/div to 10V/div - waveform capture rate: up to 200,000 wfm/s - independent time base on each channel Ch1 Ch2 Ch3 Ch4 - possibility to set individual time base on each channel example: Ch1 20ms / Ch2 200µs / Ch3 20µs / Ch4 2µS - possibility to divide the screen into 4 separate parts - oscilloscope display:- large display with a diagonal of 8 inches - displayed resolution: 800x480 - TFT screen with 16M colors and 24 bit - supports 256-level waveform intensity scale in mono color mode ~ analog to phosphor as in analog oscilloscopes - mathematical operations - FFT spectral analysis - extensive triggering system more than 14 types of triggering: Edge , Pulse Width, Video , Slope , Overtime , Window , Pattern , Interval , Under Amp, UART , LIN , CAN , SPI , IIC I2C - possibility to trigger with digital signals - serial buses - cursor measurements - automatic measurements: measurement of 34 parameters - saving and reading of waveforms to *.csv files - Pass/Fail function - Auto Scale function - so called AUTO function - self-adjusting - setting oscilloscope parameters - built-in communication interfaces: - USB Host - communication with computer - USB Device - pendrive memory support - LAN - VGA - Windows PC software - SCPI remote control command support - serial bus decoding: RS232, UART, I2C, SPI, LIN, CAN