Universal electrical installation tester

DT-6650 is a multifunction meter designed for testing electrical installations with a maximum permissible voltage of 550 VAC Rms. It includes a 3.5-inch TFT color LCD display, which provides a clear and quick reading of the parameters under test. The DT-6650 meter can measure insulation resistance, ground resistance, short circuit loop impedance, PFG and PSC currents, voltage, and check RCD circuit breakers. The specially designed housing is made to provide proper protection in harsh operating conditions - for this reason, the meter can be used both in industrial conditions and during work in small home networks. Communication with the computer is provided via Bluetooth or USB cable. Measurements: - Measurement of short-circuit loop impedance and predicted PFC/PSC ground fault current - Measurement of residual current circuit breakers RCDs - Measurement of AC and DC alternating voltage - Determination of phase rotation direction - Measurement of small resistances LOW OHM - Earthing resistance measurement - Insulation resistance measurement Features: - color display 3.5" TFT LCD 320x240 - USB interface - maximum altitude above sea level for the measurements performed 2000m - power supply 8 rechargeable 1.2V Ni-Mh AA 2500mAh batteries - rechargeable batteries - power supply input: 100~240V 1A 50/60Hz, output: 15 VDC/2.5A - cable cigarette lighter plug / DC plug - external 8GB micro SD memory card - degree of protection IP65 according to EN 60529 standard - protection class II - overvoltage category cat III, 600V - fuses (maximum cut-off current at rated voltage: >50kA) - ceramic fuse 5A/600V fast 6.3x32mm - 2pcs - ceramic fuse 500mA/600V fast 6.3x32mm - dimensions 220x96.5x60.5mm - meter weight 0.63kg - weight of the set: 1.56 kg Set includes: 1. meter DT-6650 2. 230V power supply unit with 15 VDC/2.5A output 3. set of 230V plugs for the power supply unit 4. power supply cable cigarette lighter plug/DC plug for charging batteries from car installation 5. set of Ni-Mh AA 2500mAh 1.2V batteries 8 pieces 6. strap for carrying the meter 7 USB A/mini USB plug cable 8. measuring cable with Schuko CEE 7/7 250V/16A plug with ground/3 x banana plug (red, black, green) cat II 250V 9. jaw terminals 1000V/10A 3 pieces (red, black, green) cat III. 10. 10A blade measuring terminals with protective cap. 11. 1000V cat III. test lead, with TEST button for remote start of test procedure 12. zeroing adapter for short-circuiting the Schuko plug to perform indication zeroing 13. 1000V cat III test leads (without jaw clamps applied) or 600V cat III (with jaw clamps applied) 4mm banana plug/banana plug 3 pieces (red, black, green) 14. software CD In addition, the equipment includes a USB module (Bluetooth TI CC2540), an 8GB micro SD memory card (mounted in the case) and an instruction manual. The meter's equipment does not include ground probes and long test leads for measuring ground resistance. These items must be supplied by the user himself. DT-6650 is a multifunction meter designed to test electrical installations with a maximum permissible voltage of 550 VAC Rms. It includes a 3.5-inch TFT color LCD display, which provides a clear and quick reading of the parameters under test. The DT-6650 meter can measure insulation resistance, ground resistance, short circuit loop impedance, PFG and PSC currents, voltage, and check RCD circuit breakers. The specially designed housing is made to provide proper protection in harsh operating conditions - for this reason, the meter can be used both in industrial conditions and during work in small home networks. Communication with a computer is provided via Bluetooth or a USB cable. Measurements: - Measurement of short-circuit loop impedance and predicted PFC/PSC ground fault current - Measurement of residual current circuit breakers RCDs - Measurement of AC and DC alternating voltage - Determination of phase rotation direction - Measurement of small resistances LOW OHM - Earthing resistance measurement - Insulation resistance measurement Features: - color display 3.5" TFT LCD 320x240 - USB interface - maximum altitude above sea level for the measurements performed 2000m - power supply 8 rechargeable 1.2V Ni-Mh AA 2500mAh batteries - rechargeable batteries - power supply input: 100~240V 1A 50/60Hz, output: 15 VDC/2.5A - cable cigarette lighter plug / DC plug - external 8GB micro SD memory card - degree of protection IP65 according to EN 60529 standard - protection class II - overvoltage category cat III, 600V - fuses (maximum cut-off current at rated voltage: >50kA) - ceramic fuse 5A/600V fast 6.3x32mm - 2pcs - ceramic fuse 500mA/600V fast 6.3x32mm - dimensions 220x96.5x60.5mm - meter weight 0.63 kg - weight of the set: 1.56 kg Set includes: 1. meter DT-6650 2. 230V power supply unit with 15 VDC/2.5A output 3. set of 230V plugs for the power supply unit 4. power supply cable cigarette lighter plug/DC plug for charging batteries from car installation 5. set of Ni-Mh AA 2500mAh 1.2V batteries 8 pieces 6. strap for carrying the meter 7 USB A/mini USB plug cable 8. measuring cable with Schuko CEE 7/7 250V/16A plug with ground/3 x banana plug (red, black, green) cat II 250V 9. jaw terminals 1000V/10A 3 pieces (red, black, green) cat III. 10. 10A blade measuring terminals with protective cap. 11. 1000V cat III. test lead, with TEST button for remote start of test procedure 12. zeroing adapter for short-circuiting the Schuko plug to perform indication zeroing 13. 1000V cat III test leads (without jaw clamps applied) or 600V cat III (with jaw clamps applied) 4mm banana plug/banana plug 3 pieces (red, black, green) 14. software CD In addition, the equipment includes a USB module (Bluetooth TI CC2540), an 8GB micro SD memory card (mounted in the case) and an instruction manual. The meter's equipment does not include ground probes and long test leads for measuring ground resistance. These items must be supplied by the user himself.