3-in-1 soldering station (110W grotto soldering iron, hot-air, separator) Yihua 853AAA-I Multifunctional device - separator, soldering iron, hot-air all tucked into a compact machine Ultra-high power 110W Soldering iron with a sleep The total power of the device is as high as 1240W Modern electronics inside Cobs in the device are detachable, Precise temperature setting with temp. actual on the display, and airflow control. Powerful heater results in instant heating to the desired temperature. The station is driven by the woman's built-in fan which is practically silent and does not cause vibration which is very comfortable during work. The station is equipped with flexible cable flask, which increases mobility, and convenience of work. Real temperature displays (soldering iron, hot air and heater) Systems work independently! Sepeartor has a large heating plate of 20x11cm, which allows even the largest smartphones to be serviced. Controlled by a PID controller, it ensures proper working conditions without fear of overheating the repaired screens, in addition, the device has the ability to calibrate the temperature. A powerful vacuum pump has been built into the separator, which perfectly copes with the "holding" of the LCD. Heater controlled by a programmable PID with high precision, ensures stable temperature and accuracy of readings. The heated alumunium is smooth and flat, providinguniform temperature over the entire surface. Built-in powerful vacuum pump to fix the screens, no special clamping required. Display temperature value °C or °F The surface area of aluminum is relatively large, and its temperature may vary slightly in response to large changes in ambient temperature. A temperature-correction function compensates for this potential discrepancy by correcting the temperature. The station is equipped with a deposition sensor - when the hot flask is put down on the holder, it automatically cools to 100°C, after which it goes into standby mode (the heater is turned off). This is a solution that extends the life of the heating element. When the flask is removed from the holder, it returns to its previous settings and heats up to the desired temperature. A very powerful soldering iron that providesfast heating. It only takes a few seconds to reach the desired temperature. The 853AAA-I station is first and foremost unprecedented quality visible to the naked eye, a universal device for both discerning and intermediate users in electronics production and repair. The flask is equipped with specially silicone wires resistant to high temperatures (up to 300°C), and in addition, the device has obtained sleep functions, which allows the soldering flask to go to sleep after 10 minutes of inactivity. It is also equipped with protection - ESD SAFE which protects it from overheating. The device has temperature stabilization, that is, it maintains the set temperature during soldering. ️ Technical data:️ Rated voltage range: 220 V-240 V️ Rated frequency: 50Hz️ Rated power: 1240 W️ Main unit dimensions: 275x195x130mm ± 5mm️ Operating ambient temperature: 0 ~ 40 ℃ / 32 ~ 104 ℉️ Display: Nixie LED️ Separator LCD:️ Temperature range: 50 ℃ 〜 120 ℃/122 ℉〜 248 ℉️ Heater area in separator: 200 × 110 mm ± 5 mm️ Hot Air Soldering Station️ Air source: brushless fan️ Temperature range: 100〜480 ℃/212〜896℉️ Air flow rate: ≤120L/min️ Grove soldering station️ Output power: 110 W️ Temperature range: 200〜480 ℃ / 392〜896℉️ Soldering iron: ESD design️ Type of supported tips: 902 series.