Yihua 853AAA+ 1270W soldering station/heater 3in1 - Hot-.Air and flask soldering iron Ideal for GSM service 3 modes Power 1270W Automatic cooling Hot Air Sleep function of flask soldering iron Hot Air temperature control : 100 - 480 °C Solder temperature adjustment : 200 - 480 °C Heater temperature adjustment : 50 - 300 °C Rapid heating to set temperature Convenient airflow and temperature control Operation°C/F Safety ESD Safe Features: Hot air flask holder giving you freedom when working (both hands free) Large cdigital LCD display Control of set parameters using microcomputer PID 3 Work Programs - ability to store 3 work programs for each flask. Depending on the type of work, you can set the appropriate one Temperature correction function - dependent on the working environment, the efficiency of the heating element, blowing power and the consumption of the mainsail influencing to reach the correct temperature Sleep function for the mainsolder - turns on when the flask is not used. The flask cools down to 200°C, which prevents excessive oxidation of the soldering tip, resulting in longer life of the tip and the entire heating element. Ability to turn off sleep mode High-quality heating elements with long life Safe soldering of temperature-sensitive components QFP, PLCC, BGA The size of the heater is 120x120mm gives you enough power to heat up boards from phones, navigation or tablets. ✘ Technical specifications :️ Power supply : 230V️ Power consumption : 1270W max✘ Heater :️ Power consumption : 600W️ Temperature range : 50-300 °C️ Temperature stability : 2 °C️ Heating area : 120x120mm️ Programming : operation time, temperature ✘ Hot air soldering iron :️ Temperature range : 100-480 °C️ Temperature stability : +/-1 °C️ Air supply source : brushless fan️ Airflow : max 130L/min️ Programming : time, temperature, blowing power ✘ Soldering iron :️ Temperature range : 200-480 °C️ Temperature stability : +/-1 °C️ Peak power of grotto soldering iron : 72-75W️ Ground voltage <2mV️ Ground resistance <2ohm️ Grotto flask with Yihua 907I️ The flask is equipped with HAKKO 75W 24V heater and T-B grotto.️ The cable is made of soft, heat-resistant silicone.️ 6 pin plug! Included:1️⃣ Soldering station, Heater Yihua 853AAA+2️⃣ Hot Air Flask3️⃣ Hot Air Flask Stand4️⃣ 907I grotto flask with conical tip T-.B5️⃣ Hot air flask stand with sponge for cleaning the mainsheet6️⃣ Power cord7️⃣ Gripper for lifting systemsComplete of 4 nozzles:8️⃣ 4.4mm diameter round9️⃣ 7mm diameter round1️⃣0️⃣ 9mm diameter round1️⃣1️⃣ 12x12mm square nozzle