Yihua 992D+ 2-in-1 soldering station

YIHUA 992D+ Hot-Air Soldering Station 2in1 - Hot-.Air and flask For professionals Ideal for repairing mobile phones Modern electronics inside 3 programs operation Large LCD display Power 720W Sleep function Hot- temperature control.Air: 100 - 480°C Grotto Temperature Adjustment: 200 - 480°C Blowing Power Adjustment Equipped with Correct Operation Control Function, which displays messages on the LCD about a short circuit, circuit overload or failure to reach the set temperature Infinitely adjustable supply and temperature of two independent modules 3 work programs - the station has the ability to store 3 work programs for hot air and flask. Depending on the type of work assembly or disassembly, we set the appropriate program. Temperaturecorrection function depending on external parameters controlled by microprocessor with precise PID controller, which compensates for heat loss during operation Hot air operation in automatic and manual mode:automatic mode - when the flask is put down, the system will turn off heating and cool the flask to a safe temperature C/F mode operation - you can change the units in which the temperature is displayed. Grottle flask - the station's handle is small and comfortable to use, with a fast-heating heating element that maintains stable temperature, which is electrostatically safe. Sleep function for grottle soldering iron - if the flask is not used for a pre-set time (0 - 99 min), the system puts the flask into sleep mode, i.e. cools it down to 200 °C, which ensures longer life of the device. Hot air designed to work with components like SOIC, QFP, PLCC, BGA, SMD chips. Key features: Hot Air and flask 2in1 station High-quality heating elements used in the flask are characterized by long life and performance thermal performance The hotair flask can operate in automatic or manual mode The soldering flask hassleep function when not in use Digital temperature calibration independent for both modules All controlled by PID controller Large easy to read LCD display Flask made with ESD Safe technology Compact housing Stores 3 set temperatures Large number of available blades: more than 30 models Technical specifications:️ Voltage: 220-240V️ Power consumption: 750W️ Operating environment from 0 to 50oC️ Compact design with easy-to-read LCD display.️ PID controller️ Microprocessor control of parameters: temperature,blowing power, operating time, temperature correction️ Protection against reaching too high temperature and informing by alarm.️ Ability to store 3 operating programs(temperature, blowing power)️ Cooling function️ Temperature display mode °F/°C Hot Air module:️ Air flow source : fan️ Air flow rate : up to 120 L/min️ Infinitely adjustable temperature over the entire range.️ Temperature range : 100-480°C️ Temperature stability : ±1°C️ Display type : LCD️ Flask cable length : up to 90cm️ Manual/automatic operation mode️ Protection against reaching too high temperature and informing by alarm.️ Displays actual blowing power Soldering grotto :️ Temperature range: 200-480°C️ Temperature stability: ±1°C️ Peak power: 72-75W️ Display type: LCD️ Resistance to ground less than to 2ohm️ Potential to ground less than to 2mV️ System: ESD SAFE️ Flask cable length: up to 100cm️ Sleep mode activated after inactivity 0-99 min. (selectable) Included:1️⃣ Yihua 992D+ 2-in-1 soldering station with power cord2️⃣ 907I mainsail flask with T-head.B with 75W peak power3️⃣ Hot Air flask stand4️⃣ Grotto flask stand including cleaning sponge5️⃣ Gripper for lifting circuits6️⃣ Spare filters for fume extractionComplete of 4 nozzles:7️⃣ 4.4 mm diameter round8️⃣ 7 mm diameter round9️⃣ 9 mm diameter round1️⃣0️⃣ 12x12 mm square Certificate for review only - not included with order.