IDEAL TECNOMIG 220 MMA MIGOMAT welder

. The TECNOMIG 220 single-phase powered semi-automatic welding machine made with inverter technology IGBT for MIG/MAG (gas shielded) or FLUX (non-gas shielded) welding and welding with direct current (DC) covered electrodes.Designed for welding with 0.6-1.0 mm welding wires, 0.8-1.0 mm self-shielded wires and coated electrodes up to 4 mm in diameter of low-carbon steel, low-alloyed steel (MAG), alloyed steel (MIG), aluminum and cast iron.Max spool 5 kg D200.The TECNOMIG 220 semi-automatic machine has: display of welding current parameters LED indicator lights: connect to mains (green) , overload (red) electronically controlled stepless welding current adjustment electronically controlled stepless wire feed speed adjustment overload protection. Designed for workshop and field work.ONE OF THE MOST CHOSEN HOME & WORKSHOP APPLIANCES. . . . . . . PROFITS OF THE DEVICE EURO 3M welding chuck WELDING CURRENT 30-.220 A Manual parameter adjustment INDUCTIVITY REGULATION Low weight and mobility of the machine Aluminum welding and LUTOSPAWING Gas-free welding capability. Professional robust feeder Welding with FLUX self-consuming wire Welding with MMAClear and easy-to-use control panel The device has a fan-cooling system which greatly increases its efficiency.The device is equipped with overload protection, which increases its reliability. . . . . Inverter semi-automatic welding machine recommended for sheet metal and workshop applications.Allows MIG-MAG welding with gas-shielded welding wire, FLUX welding wire with self-consuming welding wire, and MMA weldingHas the ability to change the polarity of the handle for welding with self-consuming wire.Single-phase power supply.For welding by MIG-MAG method, possibility of adjustment: welding current, wire feed speed, inductance adjustment Wire feeder: 2-roll, with roll 0.6-0.8 for steel wire.Fan-cooled.Inverter overload protection.IGBT - the welder uses modern transistors, a solution that ensures a minimum of electromagnetic interference low power loss in the basic circuits, allowing increased efficiency and reliability of the current source.FCAW - the ability to weld with cored wire without the use of a gas cylinder. The wire itself (FLUX) is filled with a substance that produces gases during welding.Inductance Adjustment - allowing less heat to be introduced into the welding area. The sheet metal does not deform and the protective layer of zinc is not damaged, useful in lute welding. . . . Price of the device with a set of MIG / MMA accessories:Welding clamp MB 15/3 Mass cable with clamp 2mPower cable with 230V plugPower cable with 230V plug8mm hose adapter for gas line connectionElectrode holder 2MBrush hammerWelding shield. . . . PARAMETERS TECHNICALCurrent drawn from mains: 21.6APower supply: 25CPower supply voltage: 230 V; 50Hz (1ph)Power: 5.5 kWIdle voltage: 50 VMaximum current: 220 ACurrent at 100% operation: 130 A (MIG/MMA)Current at 60% operation: 200 A (MIG) / 180 A (MMA)Aluminum wire diameter: 0.8 - 1.0 mmSelf-stripping wire diameter: 0.8 - 1.0 mmStainless steel wire diameter: 0.6 - 1.0 mmStainless steel wire diameter: 0.6 - 0.8 mmWelding electrode diameter: 1.6 - 4.0 mmWelding current adjustment steps: SteplessWelding current adjustment range: 30 - 220 AWire spool size: D100 (0.45kg and 1kg), D200 (2kg and 5kg)Weight of device / kit: 14 / 16kgSize dimensions L x W x H: 510x230x370 mmPackaging dimensions L x W x H: 550x250x385 mm. . .