Thread repair kit m5-m12 YT-1763 YATO

Professional set for repairing M5-M12 threads. The drills and taps are made of HSS 4341 high-speed steel. The single-stage taps cut a thread into which a hard stainless steel spiral insert is inserted. A guide knob is used to insert the insert, as well as a drift that breaks off the protruding end of the insert. The set is designed for 5 types of threads: M5 x 0.8 x 6.7 mm, M6 x 1.0 x 10.8 mm, M8 x 1.25 x 10.8 mm, M10 x 1.5 x 13.5 mm, M12 x 1.75 x 16.3 mm. Purpose / Application. Professional set for repairing M5-M12 threads. The drills and taps are made of HSS 4341 high-speed steel. The single-stage taps cut the thread into which a hard stainless steel spiral insert is inserted. A guide knob is used to insert the insert and a drift that breaks off the protruding end of the insert. The set is designed for 5 types of threads: . M5 x 0.8 x 6.7 mm, M6 x 1.0 x 10.8 mm, M8 x 1.25 x 10.8 mm, M10 x 1.5 x 13.5 mm, M12 x 1.75 x 16.3 mm. How to use. - Determine the size of the damaged thread, and then select a repair kit in the same size. . - Ream out the damaged thread with the drill bit from the kit. . - Then thread it with the tapping tool included in the kit. The tapping tool should be seated in the knob designed for threading dies. The knob is not included in the kit. . - On the knob for spiral cartridges, embed the cartridge so that the transverse part of the cartridge is in the slot of the knob. Then secure the cartridge with a ring so that it does not stretch . During screwing in. Secure the ring with a bolt. . - Screw the insert completely into the pre-threaded hole. Slide out the knob. Using a cotter pin, Break off the transverse part of the insert. . - Screw the screw into the repaired thread. Package contents. - Drills for reaming the damaged thread: 5pcs. - single-stage taps to make the thread for the new insert: 5pcs. - spiral inserts: 5 packets - knobs for screwing in spiral inserts: 5pcs - drift punches: 5pcs - allen wrench: 1pcs. - case Parameters. Size: M5-M12.