3 feather milling cutter fi 6 x 30 x 100 mm DLC carbide for ALUMINIUM

Carbide cutter fi 6 x 30 L100 mm 3-blade with DLC coating Shank diameter - fi 6 mmLength of the working part - 30 mmTotal length - 100 mm Number of blades - 3 pcs. Material - sintered carbide VHM 55 HRC Coating - DLC diamond Twist angle: 35° VHM 3 feather carbide cutters for Aluminum DLC 55 HRC The main purpose of using DLC coatings is to extend the life of the coated product. It is used for milling low-carbon steel, aluminum, copper, ferrous and non-ferrous materials, not recommended for stone and ceramics. It is suitable for low-speed machining. The advantage of using carbon coatings is high hardness,heat resistance, low friction. The cutter is used for machining: aluminum, brass, copper. Aluminum machining parameters: Workpiece material Aluminum Hardness Cutting speed (Vc m/min) Feed rate f (mm/blade Diameter (mm) Fi 3 - 6 mm Fi 6 - 8 mm Fi 8 -10 mm Fi 10 -12 mm Fi 12 - 16 mm Fi 16 - 20 mm Coarse machining 60 - 130 300 - 650 0,020 0,030 0,040 0,060 0,080 0,100 Machining finishing 60 - 130 370 - 950 0,020 0,040 0,050 0,065 0,075 0,110 Rough machining ap= ≤1xD; ae=0.1xD; with ap=1-2xD = fz=70% Finishing machining ap= 1~2xD; ae=0.05~0.1xD