TECNO MIG 285 PULSE SYNERGIC

The TECNOMIG 285 PULSE SYNERGIC is an inverter synergistic semi-automatic welding machine designed for MIG/MAG, MMA arc welding and brazing of galvanized sheets. The machine is designed for use in professional and industrial use. The device has three MIG/MAG welding modes: manual MIG, MIG PULS, double MIG PULS. TECNOMIG 285 PULSE SYNERGIC is used for welding aluminum and its alloys, stainless steel, carbon and low-alloy steels, and brazing of galvanized sheets. Welding is carried out in a shield of inert gas, active gas or a mixture, depending on the program selected on the control panel. Thanks to the use of MIG pulsation, there is an increase in the amount of heat introduced into the welded part. It is possible to obtain a better weld, regardless of the welding position and reduce the amount of spatter. With both the MIG method and MIG PULS, we can choose the function of the button in the handle between SPOT(spot welding), 2-takt, S4-takt (dedicated to welding aluminum), 4-takt (button lock for long welds), The easy-to-read and easy-to-use digital control panel allows accurate adjustment of welding parameters such as : adjustment of gas discharge time before welding adjustment of welding current / base current in double pulse inductance adjustment Initial current adjustment in S4-takt peak current adjustment in dual-pulse double-pulse balance adjustment adjustment of pulsation frequency in double pulse adjustment of spot welding time adjustment of time and voltage of wire burning after welding the adjustment of the time of gas discharge after welding Physical parameters The device has a fan-cooling system which definitely increases its efficiency. The device is equipped with overload protection, which increases its reliability. Power supply parameters Three-phase power supply 3x400V The device is equipped with a power plug. Equipment The delivery includes the device with a professional MIG 24 welding chuck with a length of 3 meters armed under aluminum, electrode cable with a length of 3 meters, mass cable with a length of 3 meters, wire feed rollers 1,0-1,2 for aluminum and 1,0-1,2 for steel.