EASYMIG 215

Semi-automatic welding machine with a maximum current of 200A. Powered by 230V mains A modern synergic with a large LCD display and intuitive controls. The Spartus EasyMIG 215 is an excellent single-phase mains-powered semi-automatic welding machine with a maximum welding current of 200 A at a duty cycle of 60%. It is used for MIG/MAG, MMA and TIG DC LIFT welding of steel, stainless steel, aluminum and its alloys. Advantages : synergic or manual control, modern control panel with LCD display, features, practical, Spartus door-to-door warranty, Don't waste time setting parameters The EasyMIG 215 mig welder has synergy, which allows you to set related welding parameters such as voltage and wire feed speed with a single dial. This is a function that makes it easier and faster to choose the right settings. The EasyMig 215 mig welder has multiple synergy programs Selectable programs for : steels with CO2 shielding gas, steel with Ar+CO2 shielding gas, aluminum, FLUX wire. The device has a manual mode as well, in which the user sets the wire feed speed and voltage according to his needs. Intuitive control control panel The large, colorful and easy-to-read LCD display allows the user to efficiently navigate through the device's menu. Two knobs and function buttons are responsible for adjusting the welder. The EasyMIG 215 semi-automatic welding machine is very intuitive and easy to use. With this migomat you choose the right parameters with one knob, you just need to give the welder the thickness of the material to be welded and the machine is ready to work. Welding support functions Inductance adjustment - allows you to optimize the characteristics of the arc depending on the thickness of the material to be welded. We can choose a soft arc characterized by fewer spatters or a hard arc characterized by greater stability. 2T/4T This function determines the mode of operation of the switch in the welding fixture. When the switch is pressed in 2T mode, the shielding gas starts flowing and the arc is struck. In this mode, you need to keep the switch pressed and only releasing the button will end the welding. This function works well when making short welds. Pressing the switch in the 4T mode starts the gas flow, but the arc will ignite only when you release the button. This allows us to weld without having to hold down the button. To finish welding, you need to press the switch and then release it. This way of welding works best when making long welds. This mig welder also has processes to assist in MMA welding. The automatic Hot Start/Hot Start ensures a secure electrode ignition without the risk of sticking. The device sets a higher welding current during the initial phase. After the hot start period, the current decreases to the set base current. Arc Force adjusts the short-circuit current to help maintain the welding arc. The Euro connector is practical The EasyMig 215 mig welder has a euro-connector socket, which allows you to connect almost any handle The device is equipped with a "Euro" type welding handle connection socket. With this solution you can connect any handle. It does not matter the manufacturer and its length. Migomat welder EasyMIG 215 is convenient and practical. Door-to-door warranty This is a convenient solution for the user offered by the Spartus brand. In case of a malfunction, the device will be collected from you and the repaired one will be delivered back to your hands. All you have to do is report the malfunction.