EasyMig 225

Semi-automatic welding machine with a maximum welding current of 200A. Powered by 230V mains. Synergistic MIG with LCD display, intuitive control suitable for large spools. Spartus mig welder EasyMIG 225 is a modern semi-automatic welding machine powered from a single-phase network with a maximum welding current of 220 A at a duty cycle of 60% adapted to work with 200 mm and 300 mm spools. It is used for MIG/MAG, MMA and TIG DC LIFT welding of steel, stainless steel, aluminum and its alloys and allows brazing of galvanized sheets. Advantages : synergic or manual control, modern control panel with LCD display, features, practical, Spartus door-to-door warranty, Don't waste time setting parameters The EasyMIG 225 features synergy, which allows you to set related welding parameters such as voltage and wire feed speed with one knob. This is a feature that makes it easier and faster to select the right settings. The EasyMig 215 mig welder has multiple synergy programs Selectable programs for : steels with CO2 shielding gas, steels with Ar+CO2 shielding gas, aluminum, powdered wire. Supported welding wire diameters : 0.6 0.8 1.0 The device also has a manual mode. Intuitive control The large, colorful and easy-to-read LCD display allows you to efficiently navigate through the device's menus. Two knobs responsible for parameter adjustment and two function buttons make the EasyMIG 225 semi-automatic welding machine very easy to use on a daily basis. The graphical representation of welding current selection based on material thickness is intuitive and does not require the user to have any experience in the selection of welding parameters Welding support functions Inductance adjustment - allows to optimize the arc characteristics depending on the thickness of the material to be welded. We can choose a soft arc characterized by fewer spatters or a hard arc characterized by greater stability. 2T/4T This function determines the mode of operation of the switch in the welding fixture. When the switch is pressed in 2T mode, the shielding gas starts flowing and the arc is struck. In this mode, you need to keep the switch pressed and only releasing the button will end the welding. This function works well when making short welds. Pressing the switch in the 4T mode starts the gas flow, but the arc will ignite only when you release the button. This allows us to weld without having to hold down the button. To finish welding, you need to press the switch and then release it. This way of welding works best when making long welds. This mig welder also has processes to support MMA welding with covered electrode. Automatic Hot Start/Hot Start ensures that the electrode ignites securely without the risk of sticking. The device sets a higher welding current during the initial phase. After the hot start period, the current decreases to the set base current. Arc Force adjusts the short-circuit current to help maintain the welding arc. The Euro connector is practical The EasyMig 215 mig welder has a Euro-connector socket, which makes it possible to connect almost any handle Connect your favorite welding chuck to your machine. Thanks to the Euro type handle socket, you can connect any handle with this type of connection. In addition, this type of welding chuck allows you to easily and quickly replace spiral or Teflon inserts. Door-to-door warranty This is a convenient solution for the user offered by the Spartus brand. In case of a malfunction, the device will be collected from you and the repaired one will be delivered back to your hands. All you have to do is report the malfunction.