EasyMig 315

Semi-automatic welding machine with a maximum welding current of 300A and powered by 400V mains. Powerful and mobile synergistic semi-automatic 300 A with LCD display and 4 roller mechanism. Spartus mig welder EasyMIG 315 is a modern three-phase mains-powered semi-automatic welding machine with a maximum welding current of 300 A at a duty cycle of 60% suitable for 200 mm and 300 mm spools. It is used for MIG/MAG, MMA and TIG DC LIFT welding of steel, stainless steel, aluminum and its alloys and allows brazing of galvanized sheets. Advantages : synergic or manual control, modern control panel with LCD display, features, practical, Spartus door-to-door warranty, Don't waste time setting parameters The EasyMIG 315 features synergy, which allows you to set related welding parameters such as voltage and wire feed speed with one knob. This is a feature that makes it easier and faster to select the right settings. The EasyMig 215 mig welder has multiple synergy programs Selectable programs for : steels with CO2 shielding gas, steels with Ar+CO2 shielding gas, aluminum, powdered wire. Supported welding wire diameters : 0.8 1.0 1.2 The device also has a manual mode. Intuitive control EasyMIG series mig welders are equipped with an intuitive graphic LCD display The large, colorful and easy-to-read LCD display allows you to efficiently navigate through the device's menus. Two knobs responsible for parameter adjustment and two function buttons make the EasyMIG 315 semi-automatic welding machine very easy to use on a daily basis. The graphical representation of the selection of welding current based on the thickness of the material is intuitive and does not require the user to have experience in the selection of welding parameters Welding support functions Inductance adjustment - allows to optimize the arc characteristics depending on the thickness of the material to be welded. We can choose a soft arc characterized by fewer spatters or a hard arc characterized by greater stability. Burn back - a function that prevents the welding wire from sticking to the current tip by additionally extending the wire after welding. Slow Feed - or soft start of the wire feeder, recommended when welding with high currents at high wire feed speeds, 2T/4T this function determines the mode of operation of the switch in the welding torch. When the switch is pressed in 2T mode, the shielding gas starts flowing and the arc is struck. In this mode, you need to keep the switch pressed and only releasing the button will end the welding. This function works well when making short welds. Pressing the switch in the 4T mode starts the gas flow, but the arc will ignite only when you release the button. This allows us to weld without having to hold down the button. To finish welding, you need to press the switch and then release it. This way of welding works best when making long welds. This mig welder also has processes to support MMA welding with covered electrode. The automatic Hot Start/Hot Start ensures that the electrode ignites securely without the risk of sticking. The device sets a higher welding current during the initial phase. After the hot start period, the current decreases to the set base current. Arc Force adjusts the short-circuit current to help maintain the welding arc. The Euro connector is practical The EasyMig 215 mig welder has a Euro-connector socket, which makes it possible to connect almost any handle Connect your favorite welding chuck to your machine. Thanks to the Euro type handle socket, you can connect any handle with this type of connection. In addition, this type of welding chuck allows you to easily and quickly change spiral or Teflon cartridges. Door-to-door warranty This is a convenient solution for the user offered by the Spartus brand. In case of a malfunction, the device will be collected from you and the repaired one will be delivered back to your hands. All you have to do is report the malfunction.