DIGIMIG 205 LCD SYNERGIC inverter welder

DIGIMIG 205 LCD SYNERGIC inverter welder The DIGIMIG 205 LCD SYNERGIC welding machine is used for manual welding of steel and non-ferrous metals. It can also be used for soldering thin (up to 3 mm) galvanized sheets. It allows welding by MMA (covered electrode), TIG Lift (with arc ignition by rubbing), and MIG methods. The MIG method can be used in manual and synergistic modes, simplifying its operation. Thanks to the change of polarity, the device allows MIG welding with both standard shielded wires and self-consuming powdered wires. Digital control allows full adjustment of parameters, arc dynamics and characteristics. The use of synergy settings for carbon steel, and aluminum in the welder greatly simplifies its operation and allows use by people with less experience and hobbyists. During MMA welding, the HOT START, ARC FORCE and VRD disable functions can be adjusted. The device has a memory of the last setting, that is, when it is turned off and turned on again, the last set parameters are restored. Thanks to the Fan Stop function that turns off the fan when the welder is under low load, the noise level is significantly reduced. The set includes a MIG chuck, ground wire and electrode wire. SPECIFICATION Part number 7812697 EAN code 5903686617706 Methods of welding/cutting/other soldering, MIG/MAG, MMA DC, TIG Lift (by rubbing) DC Supply voltage [V] AC 230 IGBT manufacturing technology Max MMA welding current [A] 180 Max TIG DC welding current [A] 200 Max MIG/MAG welding current [A] 200 MMA duty cycle [%] 30 TIG duty cycle [%] 30 MIG/MAG duty cycle [%] 30 No-load voltage [V] 54 Wire feed speed [m/min] 2 - 12.8 Feeder approach speed [m/min] 3 - 6 MIG welding voltage [V] 16.5 - 24 Welding voltage correction -5 - +5 MIG gas flow [s] 0.1-2 Max power consumption MMA [kVA} 8,5 Max power consumption TIG [kVA] 8,5 Max power consumption MIG/MAG [kVA] 8,5 Max current consumption MMA [A] 40 Max current consumption TIG [A] 29 Max current consumption MIG/MAG [A] 39 Wire spool diameter ø [mm] 100, 300 Roll dimensions [mm] 30x10x10 Main method MIG/MAG Mains protection [A] 25 Serial No. Yes Functions 2T/4T, Arc Force, Fan Stop, Hot Start, Microcontroller (MCU), Spool Gun option, 2-roll feeder, MIG gas feed, Feeder approach speed, Inductance adjustment, Gasless welding, Digital control, Quick wire feed, Manual settings, Synergic settings, VRD, Electrode selection, LCD display Warranty period for companies [years] 1 Weight [kg] 13 Dimensions (L x H x W) [cm] 495 x 210 x 330 EQUIPMENT INCLUDED TW-15/3m welding bracket Electrode cable Ground wire