SEMI-AUTOMATIC INVERTER MACHINEYTECNOMIG 285 PULSE SYNERGIC

INVERTER SEMI-AUTOMATIC MACHINE IDEAL TECNOMIG 285 PULSE SYNERGIC The machine has three MIG/MAG welding modes: manual MIG, MIG PULSE, and double MIG PULSE. TECNOMIG 285 PULSE SYNERGIC is used for welding aluminum and its alloys, stainless steel, carbon and low-alloy steels and brazing of galvanized sheets. Welding is carried out in a shield of inert gas, active gas or a mixture, depending on the program selected on the control panel. The function of saving welding parameters (10 slots) facilitates work on various materials without having to readjust the device when changing gas and wire. The easy-to-read and easy-to-use digital control panel allows accurate adjustment of welding parameters such as : - adjustment of gas discharge time before welding - adjustment of welding current / base current in double pulse - inductance adjustment - adjustment of starting current in S4-takt - peak current adjustment in double pulse - adjustment of balance in double pulse - adjustment of pulsation frequency in double pulse - spot welding time adjustment - adjustment of time and voltage of wire burning after welding - adjustment of the time of gas discharge after welding The device has a fan-cooling system which definitely increases its efficiency. The device is equipped with overload protection, which increases its reliability. Three-phase power supply - 3x400V The device is equipped with a power plug. TECHNICAL PARAMETERS: - Power - 10,2 kW - Idle voltage - 75 V - Maximum current - 280 A - Current at 100% operation - 220 A - Current at 60% operation - 280 A - Diameter of aluminum wire - 0.8-1.2 mm - Diameter of soldering wire - 0,8-1,2 mm - Diameter of self bonding wire - 0.8 mm - Diameter of steel wire - 0.8-1.2 mm - Stainless steel wire diameter - 0.8-1.2 mm - Welding electrode diameter - 1.6-4.0 mm - Welding current adjustment range - 10-280 A