CLEARPOINT® 3eco S040 SWF ultrafine filter

Optimized airflow for up to 75% less resistance. Installation of filter elements without cross-sectional narrowing and obstructive tie rods, thus reduced flow resistance and easy element replacement even in confined spaces. The 96% borosilicate filter material cavity volume ensures the lowest pressure loss. CLEARPOINT filter housing made of water-resistant aluminum and additionally anodized on the inside, Thus increased operational safety and reduced flow resistance due to permanently smooth internal surfaces. 100% control when opening the filter housing thanks to a secure locking mechanism, a warning signal sounds when opened under pressure. With highly thermally resistant (up to 120°C), highly mechanically resistant, chemically resistant and silicone-free needle felt drainage layer (unlike foam material of other filter manufacturers). Stable construction of the filter element - there is no possibility of inflating or tearing the drainage layer, For separation of oil vapors, odors and aromas by adsorption, and in the second stage of solid particles Residual content of oil vapor up to 0. 003 mg/m? at 20°C and 1 bar Absolute compressed air quality according to ISO 8573-1 For compressed air of the highest quality, e.g. for breathing, analytical technology or semi-luxury bottling Clean compressed air in combination with an ultrafine top filter With filter cartridge and manual drain Volume flow m3/h 35 m3/h Volumetric flow rate l/min 580 l/min Volumetric flow measured at 7 Bar operating pressure Air connection 3/8 " Dimensions and weights: Width/depth (product) approx. 75 mm Height (product) approx. 180 mm Technical data: Function: Safe separation of condensate, oil aerosol and solid particles. Scope: For difficult requirements, such as use upstream of membrane and adsorption dryers Particle size 0.01 µm Oil aerosol outlet concentration 0.005 mg/m3 Note on outlet concentration at 20°C and 1 bar Differential pressure (dry) 0.06 bar Compressed air quality class according to ISO 8573-1 1. - .2 Note on compressed air quality class : Since coalescing filters cannot retain any oil vapor, an activated carbon adsorber is required to achieve class 1.-.1. Optimized airflow for up to 75% less resistance Installation of filter elements without narrowing cross-section and obstructive tie rods, thus reduced flow resistance and easy replacement of elements even in confined spaces The 96% borosilicate filter material cavity volume ensures the lowest pressure loss CLEARPOINT filter housing made of water-resistant aluminum and additionally anodized inside, Thus increased operational safety and reduced flow resistance due to the permanently smooth inner surfaces 100% control when opening the filter housing thanks to a secure locking mechanism, a warning signal sounds when opening under pressure With highly temperature-resistant (up to 120°C), highly mechanically resistant, chemically resistant and silicone-free needle felt drainage layer (unlike foam material of other filter manufacturers) Stable design of the filter element - no possibility of inflating or tearing the drainage layer, for separation of oil vapors, odors and aromas by adsorption, and in the second stage of particles residual content of oil vapors up to 0. 003 mg/m³ at 20°C and 1 bar Absolute compressed air quality in accordance with ISO 8573-1 For compressed air of the highest quality, e.g. for breathing, analytical technology or semi-luxury bottling Clean compressed air in combination with ultrafine top filter With filter cartridge and manual drain