Alu pipe Alu pipe - 80 mm

Innovative, future-proof piping system for compressed air and liquids. Aluminum pipe combines all the advantages of conventional materials such as steel, plastic and copper, while avoiding their disadvantages. Thanks to consistent new development, 50% of the time needed for a previously installed system can be saved during installation. The goal of the development was to save at least half of the screw connections for individual components. Only the shape of the outer profile was retained. The diameters available are 40 mm, 50 mm and 60 mm, up to 80 mm on request. Patented fastening technology Possibility of drilling under pressure Low noise level thanks to acoustic insulation Compatible with all systems used worldwide Possibility to use all four sides Fast and secure fastening of connections Easier, simpler, faster and cheaper installation Extract air at any location Various mounting hooks available for wall or ceiling mounting Further modifications are possible at any time. Absolute tightness and reliability Required installation tools: Allen wrench deburring countersinking Saw (manual or electric saw for cutting) Lubricant (Klüber Microlube GL 261 recommended) Drill or cordless screwdriver Tapping machine (if drilling under pressure in working conditions) Your advantages quality Aluminum compressed air piping system sets new standards in compressed air distribution. development During development, great attention was paid to market feedback. Therefore, much of it will be recognized in the new system. flexibility Air can be taken anywhere, even under pressure. So changes are possible in a short time and without problems. system When it comes to compressed air systems, complete solutions from a single source are a guarantee of safety. We support you in implementing your requirements from planning to commissioning. Installation Operation is uncomplicated. Only an Allen wrench is required for installation. Power Complete system - from A to Z everything is coordinated in different sizes. Result Superior compressed air quality, high flexibility and time savings through easy installation make this the system of the future. ALS aluminum profile compressed air piping system For craftsmen or smaller industrial plants with air consumption up to max. 2000 l/min The ideal complement to the simplyAir system for branch and outlet lines. Here, too, you can benefit from the decisive advantages of our intelligent aluminum pipe system Extremely easy and fast installation Aluminum is lightweight, corrosion-resistant and particularly aerodynamic Air extraction is possible anywhere without interrupting work Complete system in various sizes, from A to Z everything perfectly matched Fast modular installation Pipe laying by simply inserting the pipes Quick assembly and disassembly without special tools Large selection of connecting parts and accessories allows the pipe network to be optimally adapted to the existing workshop Pipes and connections in various sizes, complete with plates, angles or as a T-connection, form the basis Internal diameter 80 mm Working pressure min. 10 Bar Working pressure max. 15 Bar Weight per meter 2.6 kg Dimensions and weights Length (product) approx. 6 mm Physical properties Material ENAW 6060 Chemical composition SI 0.3-0.6% Mg 0.35-0.6% 7c 0.1-0.3% Other DIN designations: ALMgSi 0.5 / F22 / ENAW Surface treatment Color chemical oxidation nature Heat treatment Wage T66 Specific gravity - Tightness 270 kg/dm3 Linear coefficient of expansion 0.024 mm/m.°C Operating temperature min -40 °C Operating temperature max. 120 °C Electrical conductivity 53 % IACS Thermal conductivity 200 W/m, K Specific heat 96 J/Kg.K Brinell hardness 70.4 HB Tensile breaking load 215 N/mm2 Elongation Breaking Load 160 N/mm2 Elastic modulus 6700 K/mm2 Elongation A 50% 6% Screw material Steel grade 8.8 Melting point 600 - 650 °C Test pressure 24 kg/cm2 O-ring seal material NBR 70 standard Operating temperature min. O-ring -20 °C Operating temperature max O-ring 100 °C