DRYPOINT M eco control DEC1-30S membrane dehumidifier

Membrane dryer with purification air control Integrated DRYPOINT M Plus solution: filtration and dehumidifier in a compact form, as well as an integrated condensate drain Filtration at the point of the treatment chain where the highest efficiency is achieved Easy maintenance/replacement of the filter cartridge like a filter Selectable degree of drying depending on the application Consistent compressed air quality under varying operating conditions Energy savings through minimized purge air consumption for actual usable air volume and degree of drying Power estimation via LED, transmission via current output 4 ... 20 mA User-friendly: easy operation, test functions, error messages Concept based on fail-safe principle, error message can be received via potential-free contact Functionality of DRYPOINT M eco control Based on the measurement result from the sensor, the control software decides in defined cycles whether and for how long to supply the full amount of purification air to achieve and stabilize the required degree of dehumidification. This process is accomplished by targeted timing of the solenoid valve. In each cycle, the duration of the two sections of the process described below varies to maintain the degree of drying within a specified tolerance range. Air purification at a pressure of 7 bar 30 l/min Sample gas at 7 bar approx. 5 l/min Air connection 1/2 " Volume flow inlet Volumetric airflow inlet (DTP reduction from +35°C to -10°C (+5°C to -26°C)) 149 l/min