MIG welding machine 3in1 MISTRAL 200 MIGOMAT. The MISTRAL MIG 200 single-phase powered semi-automatic welding machine made with IGBT inverter technology for MIG/MAG (gas shielded) or FLUX (non-gas shielded) welding, for MMA welding with direct current (DC) covered electrodes and TIG welding with direct current (DC) with contact arc ignition (TIG LIFT).Designed for welding with welding wires of 0.6-1.0 mm in diameter, 0.9 mm self-consuming wires, and covered and tungsten electrodes of up to 4 mm in diameter of low-carbon steel, low-alloyed steel (MAG), alloyed steel (MIG), aluminum, and cast iron.Max. spool 5 kg D200.Panel in Polish language.Switch of working method MIG/TIG and MMA.Two digital displays of welding current parameters (ammeter, voltmeter).Electronically controlled stepless adjustment of welding current and wire feed speed.2-roll wire feeder.In TIG welding method, contact arc ignition (TIG LIFT).Red LED on the front panel indicates shutdown due to overload.Green LED on the front panel indicates that the device is connected to the power supply.Two gas connections on the rear panel make it possible to connect an argon cylinder and a carbon dioxide cylinder at the same time.Compact and compact design makes the device applicable for indoor and outdoor repair work.Transportation is facilitated by equipping the welder with a rigid transport handle. Equipment- power cable 2 m with 230V plug- MB 15 3 m welding handle- TIG WP 26 4 m welding handle (DX50)- welding cable 2 m with 200A electrode holder (DX50)- ground cable 2 m with 300A clamp (DX50)- two gas connections for 8 mm technical hose- handle control socket 5pin and mini type 21 quick connect gas socket- 230V output socket- welding disc- brush. Technical Data :Type of device: MISTRAL MIG 200Power supply voltage [V]230Voltage pr. Idle voltage [V]56Welding current adjustment range [A]MIG50-200TIG10-200MMA10-.200Performance max at 40 °CEN 60974-1200A@60%155A@100%Wire diameter [mm]0,8 - 1.2Protection class [IP]21SDimensions [cm]58x28x42Weight [kg]16.