STILER BS 550GH Semi-Automatic Band Sawing Machine

STILER BS550 GH semi-automatic band sawing machine The new model uses a semi-automatic hydraulic cylinder, which provides automatic lifting of the saw arm after finishing cutting with adjustable stroke height. Commonly used in locksmith, manufacturing, handicraft shops. The new model uses a more powerful three-phase motor with additional safety features, a new generation maintenance-free hydraulic cylinder, closed system liquid cooling with a large drain pan. Precision and robustness put it at the forefront of band saws with the ability to cut at any angle up to 60º. Additionally, the guides have been equipped with carbide, which translates into greater accuracy in serial cuts. Main advantages of the machine are: a rotary arm up to 60º, a new generation hydraulic cylinder, a more powerful motor 2,8 kW 400V, a more efficient cooling system. The machine is equipped with a sliding vise with quick clamping which makes the replacement of the cut workpiece really efficient. Bearing guides provide secure and even guidance of the tape in the cut material. In addition, at the bearings are mounted, carbide which improves accuracy in serial cuts. A big plus is the cooling of the cutting belt located directly on the guide. Hydraulic cylinder with infinitely adjustable arm drop, facilitates more accurate adjustment of speed to the material to be cut. The machine is equipped with a powerful cooling pump (CE) with a large tank, and a comfortable handle for belt tension. The arm descent speed can be easily adjusted on the control panel. Included is a bumper for the length of the material being cut along with a scale. Specifications: Massive, stable and refined construction and an arm made of massive welded steel sheets provide the machine with very high rigidity and stability when cutting, which ensures precise cutting and long trouble-free operation. The construction as well as the use of a cutting belt with a width of 34 mm, makes it fully possible to perform multi-series cutting of both profiles and full details. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and quality of cutting. Cutting speed is regulated by a hydraulic actuator. The machine is equipped with a powerful cooling pump (CE) with a large tank, and a comfortable handle for belt tension. The feed speed is regulated on the control panel of the cutting machine. There is a choice of two cutting belt speeds of 35 and 74 m/min. In the lower position of the arm ( after the material has been cut), the cutting belt drive and cooling system is switched off automatically. Safety will be ensured by the cutting belt guards and micro switches that stop the engine when the cutting cycle is completed or when any of the guards are opened, an additional safety feature is the automatic shutdown of the cutting machine in case the cutting belt breaks. The motor is equipped with new generation thermal fuses. The base is built as a rigid body welded from steel sheets. Inside there is a separate coolant tank with an electric pump and a large drainage basin. The shape of the upper part of the base is a basin for draining coolant and catching chips generated during material cutting. A STEEL work table with a rotating arm and a control panel on a separate pedestal is attached to the base. In the cutting process, the main cutting motion is the movement of the cutting belt and the feed of the falling arm. The speed of the falling arm (cutting speed) is regulated by a hydraulic actuator. The drive from the motor to the belt drive wheel is transmitted by a maintenance-free worm and belt transmission. Specifications:Model: BS 550G Power: 2.8 kW Power supply: 400V, 3 phase Cutting belt size: 4405x34x1.1 mm Arm drop adjustment: Hydraulic cylinder with automatic arm lift Stretch belt linear speed: 48/70 m/min Weight: 620 kg Cutting range: Angle TUBE PROFILE CADRATE 0º ø400 550 x 360 360 x 360 45º. ø340 400 x 340 340 x 340 60° ø260 340 x 260 260 x 260 A video of the machine in operation