Sheet metal bending machine STILER PBB 2,0 X 1270 It is used for manual bending of sheet metal along a straight line at a certain angle. Massive construction ensures stable operation and failure-free machine. Indispensable, among others, in the production of rectangular ventilation ducts, chimney eaves roofs, fireplace ends and many others. Easy and quick to operate. Manually driven. Thanks to the use of a top beam divided into 11 removable segments, it is possible to customize the machine according to your needs. Very easy and light operation thanks to the built-in spring system that automatically lifts the top clamp when the lock is released and allows bending even with one hand. Segment widths: 25 mm - 1 pc 35 mm - 1 pc 40 mm - 1 pc 45 mm - 1 pc 50 mm - 1 pc 75 mm - 1 pc 100 mm -. 1 pc 150 mm - 1 pc 200 mm - 1 pc 250 mm - 1 pc 270 mm - 1 pc Technical parameters: Bending angle: 0° - 135° Maximum sheet width: 1270 mm Maximum sheet thickness: 2 mm Maximum opening: 46 mm Dimensions: 1710 mm x 710 mm x 1310 mm Weight: 340kg Thanks to removable segments, the machine can be easily (all you need is an Allen wrench) adapted to a specific bending specification. Such a solution allows us to bend sheet metal from 25 mm to 1270 mm wide. Easy and trouble-free system of lifting the upper beam and adjusting the die pressure. The limiting bumper facilitates serial bending at the same angle. The upper pressure is automatically raised when the lock is released (a spring system is responsible for this). To lower the pressure just press the pedal so that the locking mechanism engages and does not allow the pedal to retract. The spring is also equipped with a bending element so that bending can be done even with one hand. Maximum bending angle is 135°