Solenoid valve 6/2 50L 12V divider section for turnout

Hydraulic 6/2 solenoid valve with a flow rate of 50 liters and coil voltage of 12VThe 6/2 solenoid valve is a kind of flow divider that allows expanding the current system with an additional working section.His characteristic structure makes it possible to plug into the section of the main manifold and direct the flow of oil to an additional receiver (an example of connection given below in the auction).Through the use of this valve there is the possibility of controlling one working section two receivers, for example. actuators.Applications:Front end loader, snow plows, telehandlers, Used in t.i.d. branches. Construction industry, agricultural industry, automotive industry, aerospace industry,Valve specifications: Connection threads: 1/2" Maximum flow: 50 l/min Max pressure: 250 Bar Coil voltage: 12V Emergency operation: with pin Body material: cast iron Product designation: HEV62.50L.12V.06NExample use of solenoid valve with two actuators!Connection.The valve has two ports "P1,P2" allowing it to connect directly to two ports from the manifold section. Ports C,D connect to the ports of the main actuator in the system while ports A,B connect to the secondary actuator. It is possible to connect a pressure gauge to the valve in order to observe the amount of pressure at which the valve is activated.Manner of operation.In the initial position (no voltage on the coil) ports P1,P2 are directly open with ports C,D which through the main manifold allows the operation of the main actuator.When voltage is applied to the coil, override and opening of ports A,B occurs and allows the operation of the secondary actuator. At this moment ports C,D are cut off and thus no possibility of work with the main actuator.After the cessation of applying voltage to the coil, the spool is returned to the initial position and ports A,B are opened again, which enables further work with the main actuator..