STEHLE circular saw LWR 350 x 3.6 / 2.4 x 70 Z 28

A saw with a flat tooth (F) is a wilt saw. This blade is basically intended only for cutting solid wood. In addition to multi-saws, we can use it as a rip saw on planers and other machines. The cutting quality is coarse, which, however, is generally fully sufficient when working on a multi-saw. What is required of this type of saw blade is, above all, a long service life and robustness. In the case of Stehle saws, however, this is a common feature. The robust design means that the saws can be reconditioned after wear and tear, which further increases their service life. The disc is compatible with woll saws from the likes of Raimann, Paul, Svitava and other manufacturers. In the comments, please indicate what machine you want the saw for so that our specialists can make sure it will have the correct mounting holes. In brief. Machine/Application: Multiblades with one or two shafts For longitudinal cutting of wet and dry solid woods Design: Gearing: straight teeth "F" Blade material: HW TC2 5 Advantages: Double carbide tooth prevents contact between the sides of the wood and the steel plate. Additional information: For cutting heights higher than 50 mm QUALITY OF DESIGN. Saw made to the highest quality standard offered by Stehle 3-0-1. Used for stationary machines. It will prove itself especially in industrial applications where tools are subjected to the highest loads. The laser-cut body and properly selected carbide will ensure the highest service life and high precision machining. Like saws made in the 2-0-6 quality standard, the design of the blade silences the operation of the saw. The brewing and quality control is done by machine and then, each piece is checked by a human which guarantees the highest quality saws. Regardless of the quality standard in which the saw is made, the coats of all are produced from hardened steel, which undergoes the hardening process already at the raw material supplier. Putting this process in the hands of professionaires guarantees the highest quality of the semi-finished product. Stehle is a guarantee of continuous operation and good cutting quality. QUALITY OF CUTTING MATERIAL. HW TC25 - tungsten carbide best suited and used in saws for cutting wood-based panels, composite materials, but also successfully used in processing solid wood or building materials. The high flexibility of this carbide gradation gives the teeth a high resistance to breakage.