MAGNUM THF 220S AC/DC TIG welding machine Set.

MAGNUM THF 220S AC/DC TIG welding machine Set. The THF series devices by Magnum are professional inverter welders designed for manual electric TIG welding.The devices can also be used for MMA welding using fusible covered electrodes. They are designed for all kinds of welding work in locksmith workshops,repair workshops, industrial workshops, factories, etc.The devices are equipped with a "soft" clear panel that allows you to set all the necessary welding functions (starting current/crater filling/welding/base, current rise and fall times, gas discharge before and after welding, pulse frequency, balance, etc.).The current source has been built on IGBT transistors to ensure minimum electromagnetic interference, low power loss in the basic circuits, enabling increased efficiency and reliability of the current source.Very high efficiency, directly translating into lower power consumption, and high switching frequency, ensure instantaneous current adaptation to parameter changes during welding. BENEFITS OF THE WELDER Soft digital control panel WELDING CURRENCY 5 -. 200A/60% Welder AC/DC Function TIG POINT Function 2/4Takt. Designed forprofessional use Easy to operate even for amateurs Function MMA Welding withPULSEInfinitely adjustable welding currentWelding ALUMINIUMWelding Neutral steelTransistors IGBT Display LCD Easy to use. Inverter TIG THF 220 AC/DC welder - equipped with the necessary wiring. The device is dedicated to work in repair and production workshops. Ideal for repairing aluminum rims, air conditioning tubes and welding stainless steel railings.The device is fully digitally controlled, has a soft touch panel, so that the welder can freely and accurately set the working parameters.Puls - allows welding very thin parts, reducing the linear energy of the arc, and thus reducing overheating or burning of welded materials.HF - the device is equipped with an ionizer, which allows a non-contact look into the welding arc.PRE and POST GAS - gas discharge before and after welding.UP and DOWN SLOPE - rising and falling of welding current.The device has a function - illumination of the diameter of the electrode- for the TIG method: 1.0 - 3.2 mm- for MMA method: 1.6 - 4.0 mmSelecting the diameter does not force any parameters, it only suggests by illuminating the light - the wrong current for the diameter of the electrode, informs us that the welding current value is too low or too high for a given electrode diameter. TECHNICAL PARAMETERS:Welding current: 5- 200AEfficiency; 60%Single-phase 230V power supplyFuse 25aWeight 9 KGDigital parameter display2-tact and 4-tact functions for TIG weldingAC - AC TIG welding, AC PULS - AC TIG welding with PULS function,DC - DC TIG welding ,DC PULS - DC TIG welding with PULSMMA function - MMA welding.All TIG parameters: gas before, initial current, welding current rise time, welding current, base current, welding current fall time, final welding current, pulse frequency, pulse width, balance-AC, AC frequency, etc.MMA welding with 1.6 - 4.0 mm diameter electrodes (Arc Force, Hot Start)IGBT technologyTIG welding PARAMETERSWelding current: 5 - 200AGas pre: 0 - 10 sGas after : 0- 3 0sCurrent rise: 0 - 10 s | Current fall: 0 - 10 sTime- Adjustment of welding time at a point, adjustment range 0.5÷10 seconds.AC Hz- Adjustment of polarity change frequency for TIG AC method, adjustment range 20÷250 hertz.- Pulses Hz- Adjustment of welding current pulsation frequency for TIG method with PULSE function. The adjustment is divided into two ranges: 0.2÷20.0 Hz and 21÷200 Hz.- Puls %- Adjustment of welding current pulsation balance for TIG method with PULS function. The adjustment is carried out in two ranges depending on the set frequency: 0.2 Hz÷10 Hz - 1÷99 % 11 Hz÷200 Hz - 10÷90 %.AC balance - adjustment of polarity change balance for TIG AC method. The range of adjustment is limited and forced by the other parameters (welding current and AC frequency). The extreme ranges are 15÷85%.Arc Initiation: TIG HF / TIG LiftMMA WELDING PARAMETERS:Welding current: 10 - 160A Price of unit with complete set of TIG MMA accessoriesTIG welding handle 26MMA electrode wirewire bulkspare parts for handleGas hoseReducer with rotameterWelding angles 12 Kg x2 pcs. Welding gloves Tungsten electrode TIG Gold 1.6/2.0/2.4 mm - 3 pcs.TIG wire TIG welding wire 1.6mm for black steel - 0.5 kgTIG wire TIG welding wire 1.6mm 308LSi for stainless - 0.5 kgTIG wire TIG welding wire 1.6mm ALMG - 0.5 kg.