TIG MIG welding machine MMA FLUX 400A 4in1 KIT.

. . . . 100% INVERTER MIG MAG and MMA and TIG and FLUX electrode welder. 4-in-1 welderMMA MIG/MAG TIG LIFT FLUX-gasless welding ►Each even the simplest INVERTER is incomparably better than even the most expensive outdated transformerHere we are dealing with a proven device, We invite you to read customer reviews of the product►►Sometimes it is really worthwhile to add a few zlotys and weld the structure safely with an adequate melting in its full cross section, not just superficially glued, not to mention the appearance and strength of the weld itself.Inverter does not splash, does not leave "balls". , melts the material well, creates a nice weld without much experience of the welder after proper amperage setting . . . . One of the best flickers on the market! Best price-quality ratio!Product of a proven brand KRAFT, which has specialized in welding for years. Equipment from this company is a guarantee of quality and reliability.If you need a reliable device, this is the perfect choice for you. The device complete, ready to work after receiving the shipment.You receive:►Mass clamp (-): - 2m ►MMA electrode holder (+): - 2.1m ►Euro MIG / MAG grip: 4.2m ►Self-darkening visor of Kraft&Dele brand ►Self-shielded welding wire for welding steel parts without shielding gas. ►Other accessories. . . . . . Main advantages of INVERTERS:- High EFFICIENCY- Low power consumption- Ability to work on 16A 20A extension cords and fuses- Low weight- High weld quality- Ability to work with generators- Automatic settings and functions for improved working comfort- Ability to weld MIG MAG MMA FCAW FLUX TIG after accessories. . . . WELDING:Welding parameters are infinitely (fluently) adjustable, the maximum welding current depends on the thickness of the wire / electrode used, welding voltage, as well as the speed of wire feed in the case of MIG / MAG / FCAW method.The two-roller feeder works with wire of 0.6 / 0.8 / 1.0mm diameter.High efficiency of the welder allows you to weld 400A in 60% duty cycle. The thermal circuit breaker will turn off the device in case of exceeding the permissible duty cycle for a given welding current, thus preventing the welder from overheating.The actual parameters of the device during welding are displayed on two, very clear displays that facilitate the selection of optimal working parameters.Convenient and very clear manipulators allow you to change welding parameters even with gloves on. . . . . . . . . The use of wire allows welding without the need for additional shielding gas.EURO SOCKET AND HANDLE The presented model of the welder has a standardized EURO socket, so we can attach to the device any MIG/MAG welding chuck, which has this plug.WELDING CHANGE The welding machine allows welding with self-shielding wire without the need for shielding gas. FLUX welding, combines the advantages of MIG/MAG welding (wire wound on a spool, is fed by a feeder to the holder) and MMA (no need for shielding gas). . . . TECHNICAL DATA: ╔ model: KD811 ╠ power supply: 230V / 50Hz ╠ MIG / MAG power consumption: 6.1kVA ╠ TIG / MMA power consumption: 5.8kVA ╠ welding methods: MIG / MAG / FCAW / MMA (electrode) / TIG FLUX ╠ supported wire diameters: 0.6 / 0.8 / 1.0mm ╠ supported electrode diameters: 2.5mm - 4mm ╠ supported wire spools: up to 5kg max ╠ wire feeder: 2 - roller (internal) ╠ insulation class: F ╠ protection class: IP21S ╠ dimensions: 45 x 20 x 33 cm [L/W/H] ╚ net weight: 12kg. . . . . The welding machine migomat KD811, thanks to its design, will find use both in home workshops and households, as well as in more professional applications, such as performing field work and all kinds of repair work inside buildings.KRAFT&DELE's Migomat is a device with a wide range of applications, designed as an inverter power source that allows MIG/MAG or FCAW gas shielded flux-cored wire welding (after the change of polarity), MMA shielded electrode welding, as well as TIG Lift method (this requires the purchase of an additional holder for TIG Lift welding)The electronics of the device is based on IGBT transistors combining the advantages of two types of transistors the ease of control of field-effect transistors and the high breakdown voltage and switching speed of bipolar transistors. The welding current is very stable, which guarantees a perfect weld. Thanks to IGBT technology, the device is lightweight and compact.. . . . . . SHIELDED WELDING MASK/WELDING SHIELD Kraft&Dele KD849Designed for welding with all methods using an electric arc - MMA coated electrode and gas shielded semi-automatic MIG MAG and TIG.It is also possible to weld using the TIG (-) method - small current (20A).A special sensor located in the filter cartridge automatically identifies the start of the welding process, activating the self-darkening function.After completion of work, the filter automatically returns to the brightened state.The filter is powered by internal batteries, which recharge themselves via solar cells and do not need to be replaced.Compact and aesthetically pleasing design, high precision manufacturing.Very durable.Easy to use.Provides a wide field of view and maximum safety.Automatic on and off.Protects against UV and IR radiation.Provides multi-stage adjustment to fit the size of the user's head.Has adjustable darkening, photo-sensor sensitivity adjustment and a switch to select the welding mode.The visor is made of highly resistant polymer material.Product specificationsBrightness state: 4 DINBrightening state: 9-13 DINEye protection according to standard: EN379 1/2/1Face protection according to standard: EN175Field of vision: 92.5mm x 42.5mmResponse time: no more than 0.0001 seconds Weight: 490 gSafety mark CE. . . . . . Self-absorbing powder wire fi 0.8 mm / 1 kg E71T-GS by BLACK is designed for welding ordinary and higher strength carbon steel not exceeding 510 MPa.It is used in prefabrication, construction, tank production, agricultural equipment, etc. Used in both production and repair of equipment.Application:Designed for all welding positions, single-layer fillet and butt welds, during automatic and semi-automatic welding.It can be used for aluminized and galvanized steels with a thickness of 1.2 - 5.0 mm.Developed for general use when there are no impact resistance requirements.APPROVALS:SpecialProtective Gas (EN ISO 14175):Self-consuming wireWELD EFFICIENCY:75 - 85%WELDING CURRENCY:=(-). . . . SET INCLUDES:Welder KD811Ground clamp (-): - 2mMMA electrode holder (+): - 2.1mEuro MIG / MAG handle: 3.2mWelding visor KD8493 nozzles (one inserted)Self-stripping wire10x rutile electrodeMagnetic angle bracketBrush with hammerBasic welding maskOriginal PL manualOriginal packaging . . . . . .