Hydraulic throttling valve VRFB 90 3/4 2-str 80L

VRFB 90° 3/4" BSP hydraulic choke valve with flow rate up to 80 l/min! Manufactured by Oleodinamica Marchesini.The throttling valve is a very popular hydraulic valve used to control the movement of a receiver e.g. hydraulic cylinder or hydraulic motorHis specific design makes it possible to control the movement of the receiver in either direction.The design of the VRFU valve makes it possible to regulate the flow of oil in either direction (C ⇒ V) or (V ⇒ C). The method of connection is irrelevant to the operation of the valve.Applications:Construction industry, agricultural industry, automotive industry, aerospace industry,Valve Specifications: Connection threads: C,V: 3/4" Maximum flow: 80 l/min Pressure max: 280 Bar Counter nut thread: M35x1.5 Setting scale: yes, on knob Body material: galvanized steel Knob material: plastic (has safety screw) Seal material: Buna (synthetic rubber) Manufacturer: Oleodinamica Marchesini (made in Italy)!! Manufacturer Designation: V0589Example application of a double-return valve!A common example of the use of this type of valve is a system with control of a hydraulic cylinder in both directions - when there is a need to control the speed of lowering as well as raising the cylinderConnection.The valve has two ports C and V. The method of connection does not affect the operation of the valve.Cautions! Throttle valve due to its design is susceptible to pressure changes, which means that the flow will vary according to the flow rate, load changes on the receiver, oil viscosity, temperature. A more accurate valve that gives confidence in the setting is a flow regulator (check our other auctions - models VPR3, RFC or VFD)! Thanks to the thread located under the knob, it is possible to fence mount the valve so that only the regulator knob protrudes from above the control box, hiding the hydraulic lines and other system components.WARNING!!! In valves of this design, the ability to completely cut off the flow is possible only at low system pressures (about 2-5 bar). If you need to fully cut off the flow, we recommend using 2/2 (two-way) ball valves. To buy on our auctions.In this auction you buy one piece of throttling valve, wishing to buy more select the appropriate quantity!On other auctions we have other valves, ie. hydraulic lock (twin check valve), overflow valves, throttle valves, overcenter valves, rotary plow valves, seeder marker valves, check valves, check-back valves, shock valves, broken line valves, alternative valves, flow dividers, flow regulators and many more.