TIG 320 AC/DC pulse welding set with WRC 300B cooler and cart

TIG 320 AC/DC pulse welding set with WRC 300B cooler and TIG/MIG cart A welding set consisting of a TIG 320 AC/DC pulse welder and a WRC 300B cooler. TIG 320 AC/DC pulse is an inverter welding machine made with IGBT technology. It is used for manual DC and AC welding using the TIG method and DC welding with covered electrode (MMA method). It is widely used in both production and service work. It is designed for indoor and covered work. The welder allows full adjustment and control of all welding parameters of arc and pulse characteristics. It has HF ignition, 2T/4T function and display indicating welding current. The device is characterized by excellent welding properties, recommended especially for professionals. The set includes a liquid-cooled TIG welding holder, a ground cable with a tick clamp, an MMA electrode cable and a welding disc and hammer. The WRC 300B ALARM cooler is a fully professional device designed for liquid cooling of MIG/MAG and TIG welding fixtures, as well as other components and equipment requiring closed-circuit cooling. The cooler is designed for continuous operation. It is characterized by a simple and compact design. The use of a heat exchanger built on a copper coil definitely increases cooling efficiency and prolongs the life of the device. The cooler is equipped with a flow sensor with visual and audible alarm. The flow sensor activates the alarm when there is no flow of coolant caused by obstruction of water pipes, open circulation of fluid or its too low level in the cooler. Removal of the cause of the alarm automatically deactivates it. The welding set consists of: - TIG 320 AC/DC pulse welder - WRC 300B cooler - TIG/MIG welding cart SPECIFICATION Part number ZESTTIG320ACDCP EAN code 5903686617157 Methods of welding/cutting/other MMA DC, TIG HF AC, TIG HF DC Supply voltage [V] AC 3×400 IGBT manufacturing technology Max MMA welding current [A] 270 Max TIG AC welding current [A] 320 Max TIG DC welding current [A] 320 Duty cycle MMA [%] 40 TIG duty cycle [%] 40 No-load voltage [V] 65 Current rise time [s] 0 - 10 Initial current [A] 10-320 Base current [A] 5+-95% of welding current Current falling time [s] 0 - 25 Crater current [A] 10-320 Gas pre-flow [s] 0.1 - 1 TIG gas postflow [s] 0 - 15 TIG pulse frequency [Hz] 0.5 - 200 TIG pulse width [%] 10-90 AC frequency [Hz] 40 - 200 AC balance [%] 10-90 Max power consumption MMA [kVA} 9 Max TIG power consumption [kVA] 9 Max MMA current consumption [A] 15,2 Max TIG current consumption [A] 13,7 Main TIG method Functions 2T/4T, Alarm, Electrode cleaning function, Current ramp up, Current ramp down, TIG gas ramp down, Pre gas ramp up, TIG pulse, Analog control, LED display Mains protection [A] 16 Radiator supply voltage [V] AC 230 Pump power [W] 370 Coolant flow rate [l/min] 8 Cooling liquid pressure [MPa] 0.3 Tank capacity [l] 6 Load capacity [kg] 70 Warranty period for companies [years] 1 Weight [kg] 45.24 Dimensions (L x W x H) [cm] 98 x 56 x 110 EQUIPMENT INCLUDED Welding clamp T-18/4m Ground wire