BASIC Welding Table 2000 x 1000 mm

The BASIC Welding Table will ensure perfect flatness of the working surface, which is resistant to deformation. It owes this to a rigid and solid foundation with a height of 80mm. From now on, your welded structures will be straight, repeatable and deformation-free. Are you looking for a Welding Table without side walls, and the weight of your constructions does not exceed 1,500 kg? BASIC Welding Table will meet your expectations, and at the same time it is cost-effective and will allow you to purchase additional tools without straining your budget. The Welding Table must be flat! The tops of BASIC Tables, having a thickness of 12 mm, have dense ribbing, which affects a perfectly flat working surface. The flatness tolerance of the table over the entire tabletop is ±0.3 mm*. The BASIC Welding Table will provide a perfectly flat working surface that is resistant to deformation. It owes this to a rigid and solid foundation with a height of 80mm. From now on, your welded structures will be straight, repeatable and deformation-free. It doesn't matter whether you do your welding work classically by hand or use welding robots for it - BASIC tables are the perfect choice! This description is about the product BASIC Welding Table 2000x1000mm in φ28 hole system, 100x100mm mesh: This is the most universal system. You will use it mainly for larger, heavier welded structures, but it will work well for any type of work. Depending on your preferences, you can choose other hole systems: fi 28mm in diagonal mesh - this is the system you will also use for larger, heavier constructions, one with greater possibilities for attaching tools; fi 16mm in 100x100mm grid - you will use it for lighter and more precise work and smaller structures. It is most often chosen as a base for robotic welding stations; fi 16mm in 50x50mm mesh - you will use it for similar applications as the system above, but with greater workstation ergonomics and the ability to mount tools in more places. You decide! 100x100mm mesh, fi28 system Diagonal mesh, system fi28 Diagonal mesh, system fi28 Mesh 50x50mm, system fi16 In the current configuration you have chosen: BASIC Welding Table 2000x1000mm in φ28 hole system, 100x100mm mesh, with legs on wheels. Milled and chamfered holes in the table top affect the easy assembly and disassembly of tools during your work, thanks to the proper fit of the holes to the tools. This also contributes to their less wear - you do not need a lot of force to mount and dismount them. Such a design is the best available solution on the Welding Table market! The manufacturing tolerance of the welding table holes is ±0.05 mm. The engraved scale of the table top is vertical and horizontal lines in a 100x100mm grid. It is a reference point when laying out the structure and when assembling tools. Using the measuring tools, you can adjust your structure accordingly to get the dimension you need. Engraved scale Where will you use the BASIC Welding Table? Anywhere where precision is needed during welding. You will use it for manual or robotic welding. Your constructions will finally be made accurately, without unnecessary corrections! The BASIC Welding Table is perfect as a base for robotic welding stations, as well as for measuring. For such work, side walls are not used, so the BASIC Welding Table meets all your needs, and at the same time it is more attractively priced compared to Welding Tables with side walls. Legs are the basis! BASIC Welding Table has them made of 60x60mm profile with a wall thickness of as much as 4mm, which guarantees a load capacity of 250kg per leg and makes the table structure stable and safe. In the case of the 2400x1200mm dimension, which has 6 legs, you get a maximum load capacity of 1,500kg. You have a choice: a leg with a foot or on a caster - check which will be better for you! You will use the milled tools of the "11" series to work on BASIC Series Welding Tables. Thanks to them you will precisely make any 2D flat and 3D spatial construction. And all this in much shorter time! In the current configuration you have chosen: BASIC Welding Table 2000x1000mm in φ28 hole system, 100x100mm mesh, with legs on wheels. *Provided that the table is properly leveled.